Masterforce PGA115SU2 OPERATOR’S MANUAL

Loading ...

Page 12

OPERATION

Fig. B1

Open Guard Clamping Lever

Insert and Turn

Counterclockwise

Projection

Fig. B2

Working Position (Example)

Opened Guard Clamping Lever

Fig. B3

Working Position (Example)

Closed Guard Clamping Lever

3. FITTING THE DISCS (SEE C1, C2)

Put the inner ange onto the tool spindle. Ensure

it is located on the two ats of spindle.

Place the disc on the tool spindle and inner

ange. Ensure it is correctly located. Fit the

threaded outer ange making sure it is facing in

the correct direction for the type of disc tted.

For grinding discs, the ange is tted with the

raised portion facing towards the disc. For

cutting discs, the ange is tted with the raised

portion facing away from the disc (see C1).

Press in the spindle lock button and rotate the

spindle by hand until it is locked. Keeping the

lock button pressed in, tighten the outer ange

with the spanner provided. (See C2). For SDS

ange, keep the lock button pressed in and

tightened the SDS ange with hand. (See C3)

Fig. C1

Fig. C2

OPERATION

Loading ...

Masterforce PGA115SU2 10-Amp Corded 5" Variable Speed Paddle Switch Angle Grinder