Loading ...
Loading ...
Loading ...
5 6
www.foodsaver.com 1-877-777-8042 www.foodsaver.com 1-877-777-8042
How to
If you want to seal a bag without vacuuming, use
the Seal Button on the Control Panel. You can even
reseal bags such as mylar-type bags.
1. Place open end of bag on Sealing Strip, close lid
and use latch to lock.
2. Press Seal Button on Control Panel .
3. When Motor and Red Indicator Light turn off,
unlock latch, open lid and remove bag.
Note: As long as you place open end of bag on
Sealing Strip (not in Vacuum Channel), no air will
be removed.
How to
Seal Only
1. Prepare container according to FoodSaver
®
Accessory Guidelines .
2. Insert one end of Accessory Hose into Accessory
Port on appliance. Insert other end into port on
accessory. Twist tab on Accessory Hose while
inserting to ensure a tight fit.
3. Press Vac/Seal Button.
4. When motor and Indicator Light turn off, vacuum
process is complete. Note that the appliance
will still go through sealing cycle even when
vacuuming an accessory. You will hear Motor
shut off and then the sealing cycle will begin.
5. Gently twist and remove Accessory Hose from
accessory and appliance.
6. To test vacuum, simply tug on accessory lid. It
should not move.
Note: For important tips on using accessories with
different foods, please refer to the FoodSaver
®
Reference Guide.
How to
Vacuum Package with FoodSaver
®
Accessories
FoodSaver Vacuum Packaging Canisters (without
large knob on lid)
To release vacuum and open, push gray rubber
button on lid.
FoodSaver Bulk Canisters and Quick Marinators
(with large knob on lid) and Universal Lids.
To release vacuum and open, turn knob on lid to
Open.
FoodSaver Jar Sealer with Mason Jars
For use with Ball
®
and Kerr
®
brand Mason jars.
Important: Do NOT use screw bands when vacuum
packaging jars. To open, wedge spoon between
Mason jar lid and highest part of threaded rim.
Twist spoon gently to release vacuum.
FoodSaver Bottle Stoppers
To release vacuum and open, twist and pull up
on Bottle Stopper.
How to
Open FoodSaver
®
Accessories after Vacuum Packaging
How to
How to
Make a Bag from a FoodSaver
®
Vacuum Sealing Roll
3in (7.6cm)
Fig. 1
Fig. 4
Fig. 5
Fig. 2
Fig. 3
1. Open Lid and pull bag material over the Sealing Strip.(Fig. 1)
2. Close and Latch Lid.(Fig.2)
3. Press Seal Button.(Fig.3)
4. When Seal Indicator light turns off,
unlock latch and lift lid.(Fig.4)
5. Pull out desired bag length, Close Appliance Lid, and
slide Bag Cutter across the roll. Make sure you leave
3” of space at top for room to vacuum seal. (Fig.5)
Loading ...