Loading ...
Loading ...
Loading ...
PelPro Pellet Stove • 7083-801C • October 28, 2019 pelprostoves.com
32
Troubleshooting
Troubleshooting
Symptom Possible Cause Corrective Action
Igniter does not
turn off
Igniter short circuit. The fuse will be blown and
upon replacement of the fuse, the igniter will
remain on when Stove has power.
Inspect wires, blowers, and power cord to nd cause
of short circuit. Replace board and failed component.
Feed motor does
not shut off
Feed motor short circuit. The fuse will be blown
and upon replacement of the fuse, the feed motor
will remain on when Stove has power.
Open hopper to stop the feed motor.
Inspect wires feed motor, control board, and power
cord to nd source of short circuit. Replace control
board and failed component.
Stove fails to
shut off.
Stove running in maximum or minimum Turn dial control to Off position. See Also, “Feed
Motor Does Not Shut Off”.
The Stove should go into a shutdown.
Large, lazy
ame, orange
color. Black ash
on glass.
Dirty Stove.
Poor fuel quality, high ash content.
Incorrect air-fuel adjustment
Excessive feeding/Feed Motor locked on
Clean Stove, including re pot and venting system.
Clean exhaust path. Try a different brand of pellets.
Turn fuel adjustment trim dial to COUNTERCLOCK-
WISE to increase combustion air speed; see trim pot
adjustment section.
Follow corrective action for feed motor does not turn
off symptom.
Excessive fuel
spilling over the
re pot into the
ash wells and/or
excessive ame
Excessive feeding/Feed Motor locked on Follow corrective action for feed motor does not
turn off.
Loading ...
Loading ...
Loading ...