Loading ...
Loading ...
Loading ...
W415-3030 / A / 10.29.21
EN
10
installation
Measurements are taken from the front trim
Bottom
0”
Sides
0”
Front / Back
36” (914mm)
Mantel 8” (203mm)
• When using paint or lacquer to fi nish the mantel, the paint or lacquer must be heat resistant to prevent
discoloration.
!
WARNING
2.2 grounding the appliance
2.3 minimum clearance to combustibles
2.4 minimum mantel clearances
• This appliance is for use with 220 volts and 240 volts.
• A bonded/grounded power source is mandatory for this appliance.
• This appliance must be connected to a dedicated 15 amp circuit. The use of an extension cord is NOT
permitted.
!
WARNING
* If fi nishing materials are installed on top of the already 8” (203mm) wall, a 3/8” (10mm) clearance must be
maintained at the top of the trim in order to service the appliance.
note:
Loading ...
Loading ...
Loading ...