Loading ...
Loading ...
Loading ...
30
POSITIONING YOUR LP TANK ENCLOSURE
When determining a suitable location for your LP tank enclosure, give thought to concerns
such as proximity to traffic paths and keeping any gas supply lines as short as possible.
Never install the Summit
®
LP tank enclosure in a garage, breezeway, or shed, under an
unprotected overhang, or in any other enclosed area. Position the LP tank enclosure and
structure so there is enough room to safely evacuate the area in case of a fire.
◆
CLEARANCE FROM COMBUSTIBLE SURFACES OR
STRUCTURES
WARNING: The structure, “island” counter tops and
adjacent work areas for the LP tank enclosure must be built
from noncombustible materials only.
NOTE: If you have questions on what materials are considered noncombustible, contact
you local building supplier or fire department.
◆
DANGER
Use of any other hose and regulator assembly could be
dangerous, and may not provide adequate gas supply to the
Summit
®
Built-In Gas Grill, and could result in a fire or an
explosion causing serious bodily injury or death and damage
to property.
DANGER
Failure to build an LP cylinder enclosure for a 20 lb cylinder
following the requirements for ventilation, cylinder retention
and separation of the LP cylinder from a heat source, listed
in the ANSI Standard for Outdoor Cooking Gas Appliances,
ANSI Z21.58 CSA 1.6, could be dangerous, and could result
in a fire or an explosion causing serious bodily injury or
death and damage to property.
If you do not follow the DANGER statements exactly, the Warranty on the Summit
®
Built-In Gas Grill will be voided.
◆
CLEARANCES - INSTALLATION ADJACENT TO A STRUCTURE
a
b b
c
1
11
1 24" (610 mm) any surface
a LP tank enclosure
b Any surface
c Non-combustible surface
BUILT-IN TANK ENCLOSURE INSTRUCTIONS
CLEARANCES - "ISLAND" INSTALLATION
a
b b
c
2
11
1 24" (610 mm) any surface
2 10
1
⁄2" (267 mm) minimum
a LP tank enclosure
b Any surface
c Non-combustible surface
Loading ...
Loading ...
Loading ...