Loading ...
Loading ...
Loading ...
Page 8
OPERATION
TO ATTACH BATTERY PACK
(FIG. 1)
FIG. 1
1. Align the raised rib on the battery pack
with the grooves on the bottom of the
light, then slide the battery pack onto
the light.
2. Ensure that the battery-release button
on the battery pack snaps into place
and the battery pack is secured to the
light before beginning the operation.
NOTICE: When placing the battery pack
on the light, be sure that the raised rib on
the battery pack aligns with the groove
on the light and the latches snap into
place properly. Improper assembly of the
battery pack can cause damage to internal
components.
WARNING:
Do not direct the
light beam at persons or animals before
attaching the battery pack. The light will
be on if you didn’t turn off the light last
time. Turn the light off before detaching
the battery pack.
TO DETACH BATTERY PACK
(FIG. 1)
1. Press the battery-release button to
release the battery pack.
2. Pull the battery pack to remove it from
the light.
TO INSTALL THE BELT CLIP
(FIG. 2)
Belt Clip
FIG. 2
1. Remove the battery pack from the light.
2. Align the rib of the belt clip with the hole
on the base of the light.
3. Insert the screw and securely tighten the
screw with a screwdriver (not included).
TO REMOVE THE BELT CLIP
(FIG. 2)
1. Remove the battery pack from the light.
2. Use a screwdriver (not included) to
loosen the screw that attaches the belt
clip to the light.
3. Remove the screw and the belt clip.
Keep them in a safe place for future use.
Battery-Release Button
Loading ...
Loading ...
Loading ...