Changing the Attachment
This model has interchangeable attachments.
Below is a guide to help select the proper attachment.
Using the Eyebrow Comb (if applicable)
This model includes an eyebrow attachment comb that helps
you achieve an even cut without completely removing the hair.
1. To use the attachment comb, be sure the unit is in the “off”
position.
2. Slide the comb over the trimming blades until it locks into
place, making sure the teeth of the comb are facing the
same direction as the trimming blade.
To change heads:
1. Turn the trimmer off.
2. Detach attachment head by turning it counterclockwise to the
unlocked position and pulling it off.
3. Once the previous attachment head is removed, attach the
other head by placing it on top of the unit and turning it
clockwise to the locked position.
WARNING
To reduce the risk of burns, fire, electric shock or injury
to persons:
■ This appliance is for household use only.
■ Close supervision is necessary when this appliance is used
by, on, or near children or individuals with special needs or
certain disabilities.
■ Use this appliance only for its intended use as described
in this manual. Do not use attachments not recommended
by manufacturer.
■ Never drop or insert any object into any of the appliance's
openings.
■ Do not use outdoors or operate where aerosol (spray)
products are being used, or where oxygen is being
administered.
■ Always store the appliance in a moisture-free area. Do not
store it in temperatures exceeding 140°F (60°C).
■ Do not use this appliance with damaged or broken cutters,
as injury may occur.
■ Always remember to turn on the trimmer before you insert
it into your nose or ear to avoid painfully snagging hairs.
■ Never insert the trimmer more than 1/4" (6mm) into your
nose or ear. Foreign objects should not come into contact
with your ear drum.
Inserting the Battery
Remington
®
Nose and Ear trimmers run on one "AA" ALKALINE
battery.
1. To open the battery compartment, turn the base of the unit
approximately 1/4 inch counterclockwise and pull it off.
2. Insert the battery into the unit, positive end first.
3. Replace the base and turn it 1/4 inch clockwise to lock it
into place.
Battery cautions
■ Use of non-alkaline batteries will impair the unit's operating
performance.
■ Battery should not be left in the unit if the unit is not in use
for long periods.
■ Dead batteries should be removed immediately and disposed
of properly.
■ Do not use rechargeable batteries with this appliance.
The lower voltage in rechargeable batteries impairs the
performance of the cutting unit.
Using the trimmer in the shower
■ This appliance allows for use in or out of the shower.
■ This appliance can be stored in the shower. It is recommended
to dry off excess water and moisture after use.
■ The trimmer should not be submerged in water, bath or sink.
■ The trimmer features a non-slip rubber grip for easier
handling in the shower.
Use & Care
When using an electrical appliance, basic precautions should
always be observed, including the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS APPLIANCE.
IMPORTANT SAFETY
INSTRUCTIONS
Turning on your trimmer:
The on/off switch is integrated into the battery cap.
1. Rotate the battery cap clockwise to turn on.
2. To turn off, simply rotate the battery cap, counterclockwise,
back to the off position.
Cleaning Your Trimmer
Your nose and ear trimmer is designed to give you years of com-
fortable use. To ensure that you get optimal performance from
your trimmer, follow these simple cleaning and lubricating tips:
After each use, brush or blow accumulated hair from the
cutting unit. It is recommended to rinse your trimmer after
each use to avoid residue build up. Wash blades from the
inside out with CleanBoost Technology to maintain peak
trimming performance.
Rinsing Your Trimmer
■ Your Remington
®
trimmer can be rinsed
with cool or warm water. While running
water over the blades, push down on the
water drop symbol to separate blades
and get a more thorough clean. For best
results, turn trimmer on while rinsing
under water. Shake excess water off trimmer and pat dry
with cloth.
■ If the trimmer needs additional cleaning, the cutting head
can be removed by turning it 1/4 inch counterclockwise and
pulling it off. Then blow out the accumulated hair or rinse it
more thoroughly under running water.
■ Afterward, shake excess water from the cutter head, making
sure that all parts are held together.
■ Replace the head in the same position as it was removed,
turning it 1/4 inch clockwise until it locks into place
NE 3871
Use and Care Guide
Nose, Ear, & Brow Trimmer
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
NOSE
EAR
EYEBROW
SIDEBURNS
EDGING
ROTARY
HEAD
X
X
X
X
X
X
X
VERTICAL
HEAD
Loading ...
Loading ...
Loading ...
