Loading ...
Loading ...
Loading ...
Page 6
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS FOR
RECIPROCATING SAWS
1. Hold power tool by insulated gripping
surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring. Cutting
accessory contacting a “live” wire may
make exposed metal parts of the power
tool “live” and could give the operator
an electric shock.
2. Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the workpiece
by hand or against your body leaves it
unstable and may lead to loss of control.
3. The saw blade must be securely
locked in its holder. Check that it has
been securely seated before use.
4. Make certain that all adjusting levers
and the blade holder are tight before
making a cut. Loose adjusting levers
and holders can cause the tool or blade
to slip; loss of control may result.
5. Check that the switch is “off” before
attaching a battery. Accidental starting
could cause injury.
6. Secure material before cutting. Never
hold the workpiece in your hand or
across your legs. Small or thin material
may ex or vibrate with the blade,
causing loss of control.
7. Never touch the saw blade immediately
after use. It may be hot after prolonged
use.
8. Always wear safety goggles or eye
protection when using this tool. Use
a dust mask or respirator if cutting
generates a great amount of dust.
9. Keep hands away from the cutting
area. Do not reach under the material
being cut. The proximity of the blade to
your hand is hidden from your sight.
10. Do not use dull or damaged saw blades
and accessories.
11. When using the hook always be aware
that the blade is exposed. Always hang
the tool in an area where yourself and
bystanders can not accidently make
contact with the blade.
IMPORTANT SAFETY INSTRUCTIONS
1. To reduce the risk of electric shock or
damage to the chargers and batteries,
use only with the MASTERFORCE
®
battery packs and chargers listed.
Battery pack Charger
252-8027, 252-8029
252-8030, 252-8031
252-8034, 252-8035
252-8003, 252-8005
252-8007
252-8025
252-8026
252-8037
2. For best results, your battery and tool
should be stored, charged and used in a
location where the temperature is more
than 5°C (41°F) but less than 40°C (104°F).
Do not store outside or in vehicles.
DANGER:
People with electronic
devices, such as pacemakers, should consult
their physician(s) before using this product.
Operation of electrical equipment in close
proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
Some dust created by
power sanding, sawing, grinding, drilling and
other construction activities contains chemicals
known to the state of California to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks, cement
and other masonry products, and
• Arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals:
1. Work in a well ventilated area.
2.
Work with approved safety equipment, such
as dust masks that are specially designed
to filter out microscopic particles.
3.
Avoid prolonged contact with dust from
power sanding, sawing, grinding, drilling,
and other construction activities. Wear
protective clothing and wash exposed areas
with soap and water. Allowing dust to get into
your mouth or eyes or to lie on the skin may
promote absorption of harmful chemicals.
Loading ...
Loading ...
Loading ...