Loading ...
Loading ...
Loading ...
6
NOTICE
Reduce The Chance of Getting Furred
After shower, please turn off the gas valve and drain out the hot water in the water heater
until cool water is out. Then turn off the water inlet valve.
Freezing Prevention
Under the circumstance of low temperature, please drain the water remaining in the
heater completely after each use. Otherwise the water may freeze and cause damage the
heater.
The following phenomenon are normal:
When the water pressure is lower than 3psi, the heater cannot be ignited.
The drain valve is dripping. When the water pressure is too high, the drain valve will
release water so as to reduce the pressure to protect the heater.
When the heater is supplying hot water to too many points at the same time, the hot
water flow would be reduced, and under exceptional circumstances no hot water will
come out at all.
The gas water is for point of use, for temporary water heating and not for connection to a
permanent inlet water connection or for connection to a water distribution system to
supply multiple outlets.
\
Features
1. Automatic Operation
Turn on the hot water tap, and then hot water will come out. When the tap is
turned off, the flame will automatically go out.
Independent control of water and gas makes it easy to adjust the water
temperature.
2. Innovative Design
Ultra-thin appearance, beautiful design and convenient to install.
Advanced energy-saving combustion technology greatly improves burning
efficiency.
The heater is able to ignite at low water pressure (3psi), which fulfills the needs
of more users.
3. Complete Safety Functions
Sensitive IC flame sensor will cut off the gas supply if flame goes out
unexpectedly.
Insufficient water flow pressure protection.
The gas valve will automatically turn off when dry burning happens.
4. A shower nozzle with on/off switch and multiple spray patterns is included.
5. Ideal operating use with water pressure between 20-120 PSI.
Loading ...
Loading ...
Loading ...