Loading ...
Loading ...
Loading ...
10
Installation Method
Installation
Way 1:
⑴ Drill three Φ6mm holes in the wall according to Fig.9 then put three expansion
bolts in the corresponding holes. Put a self-tapping screw into the upper hole and
drill it into the wall and keep 3mm away from the wall.
⑵ Mount the heater vertically on the self-tapping screw in upper hole then screw
the remaining two self-tapping screws into the lower holes. Tighten three holes so that
the heater is fixed on the wall. (Fig. 10)
(2) Way 2:
When installing,please pull up the handle and hang the heater in a stable place
which can bear weight at least 30 pounds in order to avoid fall-down. Keep the
product in vertical status.
Piping
Install the pipes according to Fig. 11.
Fig.9
Fig.10
Loading ...
Loading ...
Loading ...