10035854 User Manual

Loading ...

Note: If you activate the cooling mode and there are less than 2 litres in the water

tank, an alarm signal sounds - even in sleep mode.

Setting wind speed

Press the speed button (20) to set the desired fan speed as follows:

• If you press the On button (21), the fan runs at a low speed by default, the LED

indicator for fan speed Low (32) ashes.

• If you press the speed button (20) once, the fan runs at medium speed, the LED

indicator for fan speed Medium (31) ashes.

• Press the speed button (20) twice to set the high speed, the LED indicator for fan

speed High (30) ashes.

Setting the start timer

If the air cooler is in standby mode, you can set the start timer with the timer button (18).

The timer can be activated in all operating modes. You can set the timer in 1-hour steps

from 1 to 15 hours.

Press the timer button (18) several times in standby mode to set the start time in the

following order:

The hour LEDs for the start timer light up as follows:

TIME 1h 2h 3h 4h 5h 6h 7h 8h 9h 10h 11h 12h 13h 14h 15h

1h LED √ √ √ √ √ √ √ √

2h LED √ √ √ √ √ √ √ √

4h LED √ √ √ √ √ √ √ √

8h LED √ √ √ √ √ √ √ √

Setting the off timer

If the air cooler is switched on, you can set the off timer with the timer button (18). The

timer can be activated in all operating modes. You can set the timer in 1-hour steps from

1 to 15 hours.

Loading ...

User Manual - Page 33