Loading ...
Loading ...
Loading ...
Page 12
OPERATION
INFLATING AND DEFLATING
USING LOW PRESSURE HOSE
LARGE INFLATABLES
FIG. 7
Low
Pressure
Hose
FIG. 8
Air Intake
1. Remove the low pressure hose from its
storage area.
2. a. Connect low pressure hose to low
pressure air output for inflating (FIG.7).
Align the slots on the hose to the pins
on the output and then turn the hose
counterclockwise until it locks in place.
b. Insert low pressure hose fully into air
intake for deflating (FIG.8).
3. Connect other end of the hose to the
item to be inflated/deflated. Connect
the hose directly or use the adaptor
attached to the hose.
4. Press the mode button to turn on the
pressure gauge.
5. To start inflating/deflating, press the
power switch to the low-pressure
position (II).
6. To stop inflating/deflating, press the
power switch to the off position (O).
7. When finished, remove the hose from
the item to be inflated/deflated.
8. Turn off the tool by pressing and holding
the mode button. Unplug or remove the
battery pack after use.
Low Pressure
Hose
Slot
Pin
Low
Pressure
Air Output
Loading ...
Loading ...
Loading ...