Loading ...
Loading ...
Loading ...
Page 10
TO USE THE 12VDC ADAPTOR
(FIG.2)
Remove the adaptor from the bottom of
the tool and then insert it into a vehicle’s
12VDC socket.
FIG. 2
CAUTION:
The inflator can be-
come hot during use. Allow the inflator to
cool for ten minutes after each ten minutes
of continuous use. Allow inflator to cool for
30 minutes before storing it.
LIGHT (FIG.3)
FIG. 3
Light
1. Press the mode button to turn on the
pressure gauge. Turn the light on by
pressing the light switch to the position.
2. Turn the light off by pressing the light
switch to the OFF position.
INFLATING USING HIGH PRES-
SURE HOSE
INFLATING CAR OR BICYCLE
TIRES (FIG.4-FIG.5)
FIG. 4
Lock
1. Remove the tire inflator and high-
pressure hose from its storage area.
2. CAR TIRES: Remove tire’s valve cap.
Move tire inflator’s lever straight up and
push it over tire’s valve stem. Move the
lever down to lock the tire inflator.
3. BICYCLE TIRES:
a. Schrader valve: Remove the tire valve
cap. Move the tire inflator lever straight
up and push it over the tire valve stem.
Move the lever to the locked position.
OPERATION
12VDC
Adaptor
Light Switch
Lever
Tire
Inflator
FIG. 5
High
Pressure
Off
Low
Pressure
Mode
Button
Pressure
Pressure
Unit
Open
Loading ...
Loading ...
Loading ...