Loading ...
Performance Guarantee
Limited Five-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due
to faulty material or workmanship for a five-year period from the original date
of consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will
replace it free of charge. Return your product and sales receipt with your name,
address and day time phone number to: Remington Returns Center, 507 Stokely
Dr., P.O. Box 1, DeForest, WI 53532. For more information call 800-736-4648 in
the U.S. or Canada.
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:
• Accident, misuse, abuse or alteration of the product
• Servicing by unauthorized persons
• Use with unauthorized accessories
• Connecting it to incorrect current and voltage
• Any other conditions beyond our control
No responsibility, obligations, or liability is assumed for the installation or
maintenance of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION
TO FIVE YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
This warranty shall not be valid where it is contrary to U.S. and other appli-
cable laws, or where the warranty would be prohibited under any economic
sanctions, export control laws, embargos, or other restrictive trade measures
enforced by the United States or other applicable jurisdictions. This includes,
without limitation, any warranty claims implicating parties from, or otherwise
located in, Cuba, Iran, North Korea, Syria and the disputed Crimea region.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product from
an authorized source, you are not satisfied and would like a refund, return it with the
sales receipt indicating purchase price and date of purchase to the retailer from whom
it was purchased. Spectrum Brands, Inc. will reimburse all retailers who accept the
product within 30 days from the date of purchase. If you have any questions concern-
ing the money-back guarantee, please call 800-736-4648 in the U.S. or Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
product, you are not completely
satisfied and would like a refund, return it with the original dated sales receipt
directly to Remington and receive a full refund.** For questions concerning the
money-back guarantee, please call 800-736-4648 in the U.S. or Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later than
60 days after purchase of the Remington
®
product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged product.
7. Please allow 4 – 6 weeks to receive your refund by check.
120 VAC 60 Hz Type: HC06A
Questions or comments: Call 800-736-4648 in the U.S.
or visit RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
® Registered Trademark and TM Trademark of Spectrum Brands, Inc.
© 2021 Spectrum Brands, Inc. All rights reserved. 8/21 28586
Made in China.
T22-7002291-A
Styling Guide
Giving a Comfortable,
Even Cut
Allow the clipper to cut through the hair
at a moderate pace. Moving the clipper
too quickly may result in discomfort or
an inadequate cut. Use short strokes
when cutting, starting with longer guide
combs until you are comfortable with
the length of the cut.
How to Give a Haircut
1. Start at the back of the head.
Holding the clipper as shown, lightly
stroke upward making sure you are
taking off the desired amount of hair.
Work your way up to the crown of
the head in layers. When completed,
comb the area to remove any loose
hair and to determine whether you
need any further cutting.
Before Cutting Hair
1. Make sure your hair clipper is
running smoothly, with a slight
vibration.
2. Place a cape around the neck of the
person whose hair is being trimmed
or cut.
3. This person should be seated so
that the top of his head is at your
eye level.
4. Comb the hair as it is normally
styled, removing all knots and
tangles.
5. Ensure the hair is dry. Hair clippers
perform best with dry hair, making
it easier to see how much hair is
being cut.
6. Hold the hair clipper in the palm of
one hand with your thumb resting
firmly on the top of the hair clipper.
This grip provides comfortable
cutting control. Although the hair
clipper may be used with the left
or right hand, using it right-handed
allows you to access the taper lever
more easily.
2. Repeat the same procedure for
each side of the head. Make sure
the length of the hair is trimmed
to the same length on both sides
of the head.
3. To cut the hair at the top of the
head, hold the hair between your
fingers and cut a small amount at a
time. Cut from the front to the back.
4. Remove the trimming guide and
replace with either the left or right
ear guide. The shorter guide teeth
are designed to be toward the ear.
Move the clipper from the front of
the head to the back. This creates
a tapered effect around the ears
and back of the neck.
Very short styles
1. Using the 12mm trimming guide,
hold the comb flat against the
head and move the hair clipper
from the back of the neck to the
crown of the head.
2. Cut in a similar manner from the
side to the top of the head. Then
cut from the front to the crown of
the head.
3. If a “Flat Top” style is desired,
then remove the trimming guide
and use the barber’s comb. Trim
a little at a time until a flat look is
achieved.
3. Move in a horizontal direction,
either from the front to the back
of the head or back to front of
the head, blending the transition
between the two different comb
lengths. For example: if you
choose a 9 mm length for the
upper portion of the haircut and a
6 mm length comb for the middle
portion of your haircut, then you
would use the 6-9 mm fader/
blend comb. Position the comb
with larger length side of the
comb facing towards the top of
the head or longer length of the
hair cut and the shorter length of
the comb facing downwards or
the shorter length of the haircut.
5. The final trim can be made with
the hair clipper or the included
scissors. Make sure to check over
the entire head for any uneven
areas. For styled hair or giving
quick trims, you may prefer using
your hair clipper without the
trimming guide.
6. The adjustable taper control lever
allows you to gradually change
the closeness of your cut, either
with or without a trimming guide.
When the lever is fully forward the
blades will give you the closest
cut. Moving the lever gradually
backward increases the cut length.
Fade haircut
1. To use the fade combs to achieve
a fade/blend hairstyle.
2. Select the fade comb that blends
between two length settings
chosen for your haircut and attach
it to the clipper.
1.5 mm
#0, 1/16"
3 mm
#1, 1/8"
6 mm
#2, 1/4"
9 mm
#3, 3/8"
12 mm
#4, 1/2"
16 mm
#5, 5/8"
18 mm
#6, 3/4"
22 mm
#7, 7/8"
25 mm
#8, 1"
HC4060-IB_Eng_28586_revA.indd 2HC4060-IB_Eng_28586_revA.indd 2 8/2/21 10:20 AM8/2/21 10:20 AM