Product Features
Thank you for choosing Remington. Your clipper is designed to perform dependably
and efficiently for years, helping you to maintain a range of hair styles.
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance,
basic precautions should always be
observed, including the following.
Read all instructions before using
this appliance.
DANGER
To reduce the risk of electric shock:
• Do not reach for an appliance that
has fallen into water. Unplug it
immediately.
• Do not use while bathing or in
the shower.
• Do not place in or drop into water
or other liquid.
• Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
• Always unplug this appliance from
the electrical outlet immediately
after using.
• Unplug this appliance before
cleaning it.
• Never drop or insert any object into
any of the appliance’s openings.
• Do not use outdoors or operate
where aerosol (spray) products are
being used, or where oxygen is
being administered.
• Always store this appliance and
cord in a moisture-free area.
Do not store it in temperatures
exceeding 140°F (60°C).
• Do not plug or unplug this appliance
when your hands are wet.
• Do not use an extension cord
or a voltage converter with this
appliance.
• Do not place this appliance on any
surface while operating.
• This appliance has a polarized plug
(one blade is wider than the other).
As a safety feature, this plug will
fit in a polarized outlet only one
way. If the plug does not fit fully
in the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician. Do not attempt to
defeat this safety feature.
• Do not use this appliance with a
damaged or broken cutting unit,
as injury may occur. Always make
certain blades are aligned properly.
• This clipper is designed for use
with 120 Volts AC, 60 HZ electrical
outlets. Do not connect the clipper
to a higher voltage than indicated,
as it may result in personal injury
and/or damage to the clipper.
WARNING
To reduce the risk of burns, fire,
electric shock or injury to persons:
• This appliance is for household
use only.
• An appliance should never be left
unattended when it’s plugged in.
• Close supervision is necessary
when this appliance is used
on or near children or persons with
special needs.
• This appliance is not to be used by
a child.
• Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by Spectrum
Brands, Inc.
• Keep the cord away from heated
surfaces.
• Never operate this appliance if it
has a damaged cord or plug, if it is
not working properly, if it has been
dropped or damaged, or if it has
been dropped into water. If any of
these things happen, return
the appliance to a Remington
authorized service center for
examination and repair.
SAVE THESE INSTRUCTIONS
How to Use Clipper
Line Cord Safety Tips
NOTE: This appliance has a polarized
plug (one blade is wider than the
other). As a safety feature, this plug
will fit in a polarized outlet only one
way. If the plug does not fit fully in
the outlet, reverse the plug.
If it still does not fit, contact a quali-
fied electrician. Do not attempt to
defeat this safety feature.
1. To insert plug, grasp it firmly and
guide it into outlet.
2. To disconnect the appliance, grasp
the plug and remove it from outlet.
Do not pull or yank on the cord or
appliance. Do not wrap the cord
around the appliance.
Taper Lever
Use the Taper Lever to add versatil-
ity to your hair cuts by changing the
closeness of the blades gradually. The
Taper Lever has 6 length options with
the fully forward position providing the
closest cut. Moving the lever gradually
backward increases the length.
Blade Care
The life of your clippers will depend
on frequency of use, care, hair type,
and condition. Use the cleaning
brush to clean collected hair out of
the blades as needed.
To maintain the blades in peak con-
dition, apply oil after every three to
four haircuts. Place a drop of oil on
each end and in the middle of the
blade. Then, switch on to evenly dis-
tribute. Switch off. Then, wipe away
excess oil.
To Attach Guide Combs
1. Select the trimming guide that
matches the length you want
the hair to be after the cut. The
trimming guides are numbered
and marked with specific lengths.
See preceding chart to determine
which combs are included.
2. While the clipper is off, hold the
guide comb with the teeth up.
Hook the front edge of the comb to
the teeth of the clipper blade. Then,
push the back of the comb down
until it snaps in place.
To Remove Guide Combs
Pull small tab on rear of comb up and
away from clipper.
Register Your New Product Today!
By registering your new Remington
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
Components
1. Clipper
2. Guide comb 1.5 mm
3. Guide comb 3 mm
4. Guide comb 6 mm
5. Guide comb 9 mm
6. Guide comb 12 mm
7. Guide comb 16 mm
8. Guide comb 18 mm
9. Guide comb 22 mm
10. Guide comb 25 mm
11. Fade combs 1.5 mm –3 mm
12. Fade combs 3 mm – 6 mm
13. Fade combs 6 mm – 9 mm
14. Fade combs 9 mm –12 mm
15. Fade combs 12 mm –16 mm
16. Cape
17. Neck brush
18. Blade oil
19. Scissors
20. Blade protector
21. Cleaning brush
22. Storage case (not shown)
5
2
8
6
3
9
7
4
10
11
12
13
14
16
17
18
19
20
21
15
1
EASY FADE
HAIRCUT KIT
Use and Styling Guide
HC4060
HC4060-IB_Eng_28586_revA.indd 1HC4060-IB_Eng_28586_revA.indd 1 8/2/21 10:20 AM8/2/21 10:20 AM
Loading ...
