Loading ...
Loading ...
Loading ...
17
EN
1 Top cover 8 Cup tray
2 Rotating knob 9 Drip tray
3 Espresso button (single cup) 10 Bottom cover
4 Espresso button (double cup) 11 On/off switch
5 Steam button 12 Steam tube & nozzle
6 Front panel 13 Water tank
7 Porta-lter:
7-1. Single cup lter
7-2. Double cup lter
7-3. Retention clip
7-4. Filter holder
14 Measure scoop
OPERATION
Before rst use
1 Make sure that the water tank is lled with water till max mark.
2 Place a cup right onto cup tray.
3 Plug on and turn on the machine. The buttons on the control panel will ash red and
blue by turns.
4 Press any button, the unit will start pumping a small amount of water. Wait till the
water nishes, then the unit will enter to pre-heating mode.
Espresso
1 Plug the unit in. Switch on the unit.
2 Rotate the knob to the “0” position to start the preheating. The coffee and steam
button will keep ashing during preheating. Lights will stop ashing and remain on
steadily while nishing preheating.
Note: The unit will dispense a small amount of water to the drip tray, when the
machine is nished the coffee brewing or steam making and the knob is rotated to
middle position. This is normal.
Loading ...
Loading ...
Loading ...