Model as shown
KIC36-MS
Energy Efcency Burner
Slide Touch Controls
Bridge Element
• Precision temperature control delivers consistent cooking results.
• Industry exclusive Marquise
TM
accented glass cooking surface
presents an authentic visual connection to the Hestan design integrity.
• Powerful energy efcient induction burners only heat up cooking surface
area under cookware.
• Slide touch controls offer smooth, precise selection of power.
• Low simmer allows for gentle cooking for even
the most delicate of sauces.
• Versatile bridge element (36” model) transforms conveniently
to a larger cooking surface.
• Cookware detection system safely shuts off induction burners when cookware is removed.
When cookware is returned orginal temperature setting is reestablished.
• Locking controls provide additional safety and peace of mind.
• 2 Timer functions allow for an independent timer or a timer for
each individual cooking zone from 1 to 59 minutes.
• Automatic Quick-Boil heating function allows for elements to heat up more
quickly to the desired heat setting.
• Audible alerts and feedback provide certainty of control interface.
• Elegantly styled professional stainless steel frame adds beauty and protection.
• Available in black or metallic silver ceramic glass.
• Warming function maintains low temperature for extended periods.
STANDARD FEATURES
INDUCTION
COOKTOPS
INDUCTION COOKTOPS
www.hestanhome.com phone 888.905.7463
3375 E. La Palma Ave., Anaheim, CA 92806
INDUCTION
COOKTOPS
www.hestanhome.com phone 888.905.7463
3375 E. La Palma Ave., Anaheim, CA 92806CONTACT US:
ELECTRICAL REQUIREMENTS
:
208/240V, 60Hz, 40 or 50 amps
Built - In
Models
Description
Approx
SHP WT (lbs)
KIC30-__ 30” Induction Cooktop
19
-⁄
KIC36-__ 36” Induction Cooktop
40 Amp
50 Amp19
-⁄
28
-⁄
34
-⁄
A (in.) B (in.)
Cutout Dimensions
_= BK (black glass nish) _=MS (metallic silver nish)
Circuit Breaker
Required
59
74
Hestan Indoor products are approved for indoor
use only. Hestan Commercial Corporation reserves the
right to change materials and specications without notice.
30” COOKTOP DIMENSIONS
30” 3/8
[771 mm]
21” 3/16
[538 mm]
1/4”
[6mm]
2” 5/8
[66 mm]
1” 1/16
[27 mm]
36” COOKTOP DIMENSIONS
36” 3/16
[919 mm]
21” 3/16
[538 mm]
1/4”
[6mm]
2” 5/8
[66 mm]
1” 1/16
[27 mm]
CUTOUT DIMENSIONS
LENGTH OF CUT
A
LENGTH OF CUT
B
1-1/2” [3.8cm]
MIN CLEARANCE
FROM EDGE OF CUTOUT
TO FRONT EDGE OF
COUNTE RTOP
2-1/2” [6.5 cm]
D
G
C
E
F
Cutout width D E F G
30”
[76.2cm]
18” [45.7 cm] min
Height from counter-
top to nearest cabinet
on either side of unit
2” [5 cm] min Clearance
from cutout to side wall
on the left and right of
the unit
13” [33 cm] Depth
of unprotected
overhead cabinets
36”
[91.4cm]
Cutout width A B C
30”
[76.2cm]
28-3/4” +/- 1/16”
[73.0 cm +/- 0.1cm]
19-7/16” +/- 1/16”
[49.4 cm +/- 1mm]
30”
[76.2 cm] min
36”
[91.4cm]
34-5/8” +/- 1/16”
[87.9 cm +/- 0.1cm]
19-7/16” +/- 1/16”
[49.4 cm +/- 1mm]
36”
[91.4 cm] min
NOTE: 24” [61 cm] min. clearance if bottom of wood or
metal cabinets is protected by not less than 1/4” [0.6 cm]
ame retardant millboard covered with no less than No. 28
MSG sheet steel 0.015” [0.04 cm] stainless steel, or 0.024”
[0.06 cm] aluminum or 0.020” [0.05 cm] copper. 30” [76.2
cm] min. clearance between top of cooking platform and
bottom of unprotected wood or metal cabinet.
Under the cooktop it is necessary to install a
partition, as shown.
WALL COVERING CABINETS,
AND COUNTERTOP MUST
WITHSTAND HEAT UP TO 200° F [93° C]
CUTOUT REQUIREMENTS
30” [76.2 cm] min.
[see note*] Clearance
from countertop to
unprotected
overhead surface
NOTICE
min
VERTICAL CLEARANCES
* The ventilation opening is to extend the full length of the cooktop cutout.
25” [635 mm]
min
”
2 1/2”
[64mm]
3
”
[76 mm]
2 1/2”
[65 mm]
1 5/8”
[40 mm]
max
1/4”
[6 mm]
min
36”
[915 mm]
24” [610 mm]
15 3/4”
[400 mm]
5”
[127 mm]
min
*1/4”
[6 mm]
min
min
19 7/16 [494 mm]
1 1/2
4 3/4
[120 mm]
[38 mm]
min
”
”
4”
[101 mm]
min
Partitian
021886 REV A
