Loading ...
Loading ...
Loading ...
Page 8
ASSEMBLY
Read and under
stand entire Operator’s M
anual for each
optional attachment used on this power
head and follow all warnings and instructions.
Failure to follow all instructions may result in
electric shock, fire and/or serious personal
injury.
The trimmer head shaft connects to the
power head by means of a coupler device.
1. Loosen the screw on the coupler.
2. Push in the release button located on the
trimmer head shaft. Align the button with
the guide recess on the power head coupler
and slide the two shafts together. Rotate
the trimmer head shaft until the button locks
into the positioning hole.
3. Tighten the attachment screw with the
Allen key (included) securely.
ASSEMBLY
UNPACKING
This product requires assembly.
• Carefully remove the product and any
accessories from the box.
• Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
• Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the product.
• If any parts are damaged or missing, please
call 1-844-MSTR4CE (844-678-7423) for
assistance.
GUARD
WARNING
To prevent accidental
starting that could cause serious personal
injury, always remove the battery pack from
the tool when assembling parts.
1. Remove the battery.
2. Invert the string trimmer to access the string
trimmer head.
3. Using a Allen key (included), remove the
pre-installed screws from the guard plate on
the string trimmer head.
4. Place the guard onto the string trimmer
head and slide the guard onto the head by
following the track on the head.
5. Align the screw holes on the guard with the
screw holes on the string trimmer head.
6. Insert the screws into the string trimmer
head, fastening the guard in place.
WARNING
Loading ...
Loading ...
Loading ...