Masterforce 2100294VT OPERATOR’S MANUAL - 80V BRUSHLESS 16" STRING TRIMMER

Loading ...

Page 14

OPERATION

REMOVE THE STRING TRIMMER

HEAD OR RE-INSTALLING TRIM-

MER HEAD

1. Line up the spacer hole up with the hole in

the gear box.

2. Place a small screwdriver or metal rod (not

included) in the spacer hole. Rotate the head

until the metal rod or screwdriver drops into

a notch. Keep the rod or screwdriver in this

notch, it will hold the trimmer head still so it

can be unscrewed from the shaft.

3. Rotate the head clockwise to unscrew the

trimmer head, removing it.

washer covers the shaft opening. Behind it,

is a smaller washer with sprocket notches

cut on the inner edge. If these washers fall

off while removing the trimmer head make

sure the smaller washer with sprocket

washer when replacing the trimmer head or

installing a new head.

5. Reverse steps 1-3 to reinstall the same

string trimmer head.

CUTTING TIPS

• Keep the trimmer tilted toward the area

being cut; this is the best cutting area.

• The trimmer cuts when moving the unit

from right to left. This will avoid throwing

debris at the operator. Avoid cutting in the

• Use the tip of trimmer line to do the cutting;

do not force string trimmer head into uncut

grass.

• Wire and picket fences cause extra trimmer

line wear and breakage. Stone and brick

walls, curbs, and wood may wear trimmer

line rapidly.

• Avoid trees and shrubs. Tree bark, wood

moldings, siding, and fence posts can

easily be damaged by the trimmer line.

FIG.10

FIG.11

Loading ...

Masterforce 2100294VT 16" 80 Volt Brushless Cordless String Trimmer