Loading ...
Loading ...
Loading ...
STANDARD FEATURES
SERVICEABILITY
All 2OAC/OACH Series units are designed with quick connect removable side panels to provide full
service accessibility. Only one screw needs to be removed for access to the inside of the unit. Turn to
page 17 “Part Replacement Procedure” for removal of the correct panel when replacing a part. The
interior is divided into two sections, front and rear. The front section contains the evaporator blower, coil,
condensate bucket and thermostat. The rear section contains the condenser blower, coil, compressor,
electrical control box and cord storage box.
ATTRACTIVE CABINET
The 2OAC/OACH Series cabinet is constructed of 18 gauge cold rolled steel with a gloss grey and blue
texture polyester powder coated finish that will compliment any decor. The entire cabinet is insulated
with a sound absorbant insulation for cool, quiet comfort.
HIGH PRESSURE SAFETY SWITCH
All units incorporate a manual re-set high pressure switch for maximum protection of the refrigeration
system and compressor. The cut-out pressure setting is 375 ±5 psig or 425 ±5 psig. If the pressure
exceeds this setting, the compressor stops and can be re-started by depressing the “RESET” button
located on the back panel of the unit. The high pressure control’s capillary line is attached to a schrader
valve. This allows replacement of a defective control without recovering the refrigerant.
5
Condenser Motor
Condenser Coil
Control Box
Kick Plate
Casters
Evaporator Motor
Evaporator Coil
Condensate Tank
Condensate Tank Tray
Water Level Detection
Control
Loading ...
Loading ...
Loading ...