Loading ...
Loading ...
Loading ...
6
Using in upright steam cleaning mode
2
Attach the micro-fibre floor cloth (18) to the
floorhead (17), securing it in place using the
hook and loop fastener pads.
Remove the handheld steam cleaner (8) from the
main body (7) by pressing the handheld release
button (3). Open the filler cap (14) by lifting the tab.
Fill the water tank (11) using the funnel (20) and
filling jug (21).
IMPORTANT: To prevent limescale build-up in the
water tank, never fill the steam cleaner’s tank
with anything other than deionised,
demineralised or distilled water (available from
most leading supermarkets). Any problems
arising from limescale will invalidate the product
guarantee.
Close the filler cap. Reposition the handheld steam
cleaner back into the main body (see points B and
C of ‘Upright Steam Cleaning: Assembly’).
Rotate the upper cord storage hook
(5) to
quickly release the power cord (4).
4
WARNING: Before switching ON, ensure the
floorhead (17) is located safely away from
persons or animals.
Plug in at the mains outlet and switch on the
steam cleaner by rotating the steam dial
(9) to
your desired setting. The power indicator light (10)
will illuminate green and steam will be emitted
after around 40 seconds.
1
I
MPORTANT: Before use, hardfloors should be thoroughly swept and carpets should be thoroughly dry
vacuumed. However, we recommend that the steam cleaner is not used on:
• bare wooden floors or any surfaces where wood is exposed (as it will absorb moisture and may distort).
• d
amaged hardfloors or hardfloors with gaps present (as it will absorb moisture and may distort).
A
lso, do not keep the steam cleaner in one place for an extended period, because the continual heat may
cause damage to carpets and laminate flooring.
P
lease disconnect and allow the unit to cool before changing cloths and attachments.
VC720512MUK Rev1.qxp_Instruction Book 15/04/2020 10:40 Page 6
Loading ...
Loading ...
Loading ...