Loading ...
Loading ...
Loading ...
16
EN
Button Function
POWER Insert the plug into the socket. Press the POWER button to turn the device
on. The display shows [60:00], and the preset time is 60 minutes.
TIMER You can set the timer in 10-minute increments between 10–60 minutes.
To do so, press the TIMER button repeatedly to set the timer to the desired
time. The preset time for the timer is 60 minutes.
START/
STOP
Set the timer rst. Then press START / STOP to start the ice cream
production. During ice cream production, the display will remain
illuminated all the time. Press START / STOP during ice cream production
to stop and restart the mixer blade. The compressor will continue cooling
even when you stop the mixer blade.
NOTE: Do not hold down the START / STOP button for more than 3 seconds, otherwise
the device will be reset to the default settings and all settings will be cleared.
When the set time has elapsed, the motor will stop automatically and will beep 10 times
in a row. The display will show [00:00], and the display will ash in secondary mode. If
you do not empty the device in the next 10 minutes, it will enter the cooling mode so that
the ice cream does not thaw.
Extended cooling function
The cooling function is maintained for up to a maximum of 1 hour. Then the device will
return to the default state. In this case, the display will be illuminated, but no functions
will be active.
WARNING
Risk of electric shock. Always remove the plug from the socket before
you remove the ice cream to avoid electric shock.
Loading ...
Loading ...
Loading ...