Loading ...
Loading ...
Loading ...
Page 4 of 6
201027
Fig.5
3 Dials
ON OFF
Press the ON Switch “ ” in order to turn the light on (See Fig.5).
The light will activate at 800 lumens once motion is detected for the desired
duration-see “TIME” instructions below.
Press OFF Switch “ ” to turn off. The light will remain off and not detect any
movement (See Fig.5).
ADJUSTING THE LIGHT
On the bottom off the motion sensor unit there are 3 dials:
SENS (sensitivity to motion)- this determines the range of the motion detector.
Rotating the dial clockwise will increase the sensor range from 26ft to 50ft and
a 120˚ angle.
TIME - the duration the light stays on after motion has been detected.
This can be adjusted to the light will remain on from 10 seconds up to 60
seconds when the motion sensor is activated. Rotating the dial clockwise will
extend the time the light is illuminated.
LUX (sensitivity to light)- Turn the “ LUX ” knob clockwise to “ ” position,
the light turns on day and night. Turn the “ LUX ” knob counter clockwise
to “ ” position, the light turns on at dusk and turn off at dawn
automatically - this is the ideal setting for general evening and nighttime.
FUNCTION AND OPERATION
TO INSERT / CHANGE BATTERIES
Notes:
1. The sensitivity of the motion sensor will increase as the
environmental temperature gets cooler. For best performance,
gently clean the lens with a soft cloth every 1 or 2 months to
ensure maximum sensitivity.
2. For best performance, install fixture at least 8 feet above the
ground. At such a height, the fixture will provide a detection
distance of up to 50 feet at 77 degrees Fahrenheit. (See Fig.6)
3. The sensor detects movement across a detection range of
120 degrees. (See Fig.7)
4. The sensor will be more sensitive to motion across its detection
path than motion directly towards it. (See Fig.8)
5. To reduce possible nuisances, do not mount the fixture near a
heat source like an air conditioner, vent or furnace.
Fig.8
Motion
Least sensitive
Motion
Most sensitive
Sensor
10'
8.0'
12.0'
50'
Where you install your fixture is important:
Be sure the light is mounted straight on the wall;
otherwise, the detection distance may be limited.
Fig.6
Fig.7
˚
120
Loading ...
Loading ...