Loading ...
Loading ...
PACKAGING CONTENTS
Seat Cushion with
Lifting Lever
Cylinder Base
ASSEMBLY INSTRUCTIONS
Note: No tools are required for assembly, but inspect components for proper fit and alignment
before assembling. Tighten any loose fasteners. Do not use if any parts are damaged or missing.
1. Place the base on a solid surface and insert the wider end of the pneumatic cylinder into the opening
in the center of the base.
2. Carefully, position the seat assembly over the center rod in the pneumatic cylinder and press down.
3. Ensure all three pieces have properly seated and fit together tightly. You should now be able to lift
the seat up by the cushion without it coming off the pneumatic cylinder. If the seat comes off, repeat
steps 2 and 3.
Step 1
Step 2
Step 3
PRESS
16" / 41cm
22-1/2" / 56 cm
28" / 71 cm
Press seat lever
to raise and
lower seat.
2