Loading ...
Loading ...
Loading ...
11
English
When the battery capacity is low “LOW” blinks when
operating the appliance.
The appliance beeps twice after switched off.
You can trim approx. 5 minutes after “LOW” blinks.
(This will differ depending on usage.)
3
Press when nished.
Locking/unlocking the power switch
► Locking the power switch
1. Press
for more than 2 seconds.
• The switch lock lamp ( ) will light up for
5 seconds and turn off.
• The appliance will stop operating.
2. Release .
► Unlocking the power switch
1. Press
for more than 2 seconds.
• The switch lock lamp ( ) will turn off.
2. Once the appliance starts operating, release .
AC operation
If you connect the AC adaptor to the appliance in the same way as
for charging, and turn on the power, you can use it.
• If the remaining battery is too low, the blades may move slowly
or stop, even with the AC operation. In this case, charge the
battery for 1 minute or more.
• The battery will be discharged, even with the AC operation.
Removing and mounting the attachments
• Take care not to injure hands, etc., with the blade when removing
or mounting the attachment.
• Turn the appliance off.
► Mounting the attachment
Mount the attachment to the main body
until it clicks.
• If the attachment is not attached
correctly, it may shift and end up cutting
too much during use.
click
► Removing the attachment
Hold the main body securely and remove
the attachment from the main body.
Loading ...
Loading ...
Loading ...