Loading ...
Loading ...
Loading ...
re-insertthelidandlterFlipthewatertankonceagainuntilitisrightsideup.Ensurethatthebasin
is clean and then carefully place the water tank back on the lower body.
Wait a few seconds until the water tank lid starts to release water into the basin. You will hear a bub-
bling sound as the air enters the water tank. Plug the power cord into the electrical outlet (NEVER
SWITCH ON THE HUMIDIFIER WITHOUT WATER lN THE BASIN).Ifthehumidierisswitched
o,thevaluesforhumiditywillnowbedisplayed.
PresstheON/OFFButtontoactivatethehumidier.Themachineisnowoperatinginmanualmode.
It will release cool mist on a constant basis with the mist intensity level automatically set to me-
dium. The two jets at the top of the machine can be rotated to blow mist in two directions. You may
also lift the jets from the water tank, adjust the positions and reinsert them back into the top of the
water tank. The output jets should not be set to spray directly onto people, electrical devices or any
obstructions. It is best to direct the jets into the open air.
The MAX/MIN Button changes the mist level (low, medium, high). This change is displayed on the
LED screen by the mist volume indicator (#21). If the machine is in the automatic mode, it will au-
tomatically adjust the mist intensity.
12
13
Loading ...
Loading ...
Loading ...