Loading ...
Loading ...
Loading ...
9
Assembly Instructions
13. Ask for assistance to flip the unit around at its front edge as shown.
14. With the pilot holes as a guide, fasten the Middle Crossbar (N) to the Middle Stiles (H) by attaching
two Mending Plates (16) at the joints, using two 12 mm Screws (14) per plate.
15. Now, go back and securely tighten all the bolts and screws. Make sure that all the parts are tight and
there are no gaps between the parts. This will help keep the unit square.
16. Pick up the Middle Back Panel (M) and align the pre-drilled holes against the upper long edge with the
pilot holes on the back rail of Top Panel (A). Attach the Middle Back Panel (M) in place with provided
15 mm Washer Head Screws (4).
17. Using the pilot holes as a guide, align and attach the Side Back Panels (L) to the mantel frame with the
provided 15 mm Washer Head Screws (4).
NOTE: We recommend attaching back panel with washer head screws at the corners first.
N
H
H
14
16
N
H
L
M
L
4
L/M
Loading ...
Loading ...
Loading ...