Loading ...
Loading ...
Loading ...
12
Assembly Instructions
26. Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening. DO
NOT drag the insert across the Base (C) as it may scratch the unit.
27. Use the pilot hole as a guide, fasten two L-shaped Metal Brackets (8) onto the Firebox Support (I) with
four 15 mm Pan Head Screws (5) as shown. Make sure that the right angle is flush with the short edge
of firebox support.
28. Using the pilot holes as a guide, fasten the Firebox Support (I) between the Partiton Panels (E and F)
with four 15 mm Pan Head Screws (5).
NOTE: The doors are shipped with Glass Door Insert. You can keep the doors as they are or
interchange with the Wood Door Insert (G) depending on your configuration.
29. To change the configuration, loosen the screws on the inside of Doors (K) and rotate the clips to
remove the door insert panel. Replace with the desired panel, then rotate clips to secure the panel
within the door frame and tighten screws.
I
I
E/F
5
5
8
C
I
I
E
F
K
K
G
Loading ...
Loading ...
Loading ...