User Manual Insignia NS-PSOXMW1 - Pulse Oximeter with Digital Display - White

Documents for Insignia NS-PSOXMW1

The following documents are available:
User Manual Other Documents
  • Quick Setup Guide: Español - (Spanish) Download
  • Warranty Sheet: English - (English) Download
Photos
NS-PSOXMW1 photo
Before using your new product, please read these instructions to prevent any damage.
Top View
Bottom View
Battery cover
Hanging hole
Pulse rate
Power Button
Pulse bar
QUICK SETUP GUIDE
Pulse Oximeter
with Digital Display
NS-PSOXMW1
PRODUCT OVERVIEW
INSTALLING THE BATTERIES
When the battery indicator is blinking, replace
the batteries.
1 Slide the battery cover o.
2 Insert two AAA batteries into the
compartment. Make sure that the + and –
signs in the compartment match the batteries.
3 Replace the battery cover.
Note: Remove the batteries if your pulse oximeter will
not be used for long periods of time.
TAKING A READING
Note: This device is not intended to diagnose or treat any
medical condition or disease. It is intended for
non-medical use by healthy people to monitor their pulse
rates and blood oxygen levels. It is for sports and aviation
use only. People who need SpO
2
and pulse rate
measurements because of a medical condition should
not use this pulse oximeter and should consult with their
physician.
1 Clean the nger being tested with alcohol before
and after each test.
2 Squeeze the end of your pulse oximeter and
insert a nger into the opening.
3 Press the power button to turn on your pulse
oximeter.
4 Keep your nger, hand, and body still while your
pulse oximeter takes a reading. The display
shows your oxygen saturation and pulse rate.
5 When you're nished, remove your nger. Your
pulse oximeter turns o automatically when
there is no signal for eight seconds.
USING YOUR PULSE OXIMETER
Changing the brightness
Turn on the pulse oximeter, then press and hold
the power button to adjust the display's
brightness. There are 10 brightness levels. The
default is level four.
Changing the display mode
Turn on the pulse oximeter, then press the power
button to change how the readings are displayed.
There are four display modes:
Attaching the lanyard
1 Thread the lanyard through the hanging hole,
then pull the lanyard through the smaller loop.
2 Thread the thick end of the lanyard through
the threaded end before pulling it tight.
WARNINGS:
Keep your oximeter away from young children. Small items such as
the battery cover, batteries, and lanyard are choking hazards.
The lanyard that is tied to the oximeter may cause strangulation
due to excessive length.
FEATURES
Attaches painlessly to your nger and
measures your oxygen levels and heart rate
without the use of needles
Digital display shows your results in a clear
and easy-to-read format
Compact size for easy storage and
transportation
10 brightness levels let you read the display in
dark environments
PACKAGE CONTENTS
• Pulse Oximeter
• Lanyard
AAA batteries (2)
• Quick Setup Guide
Low battery indicator
Oxygen saturation
NS-PSOXMW1_21-0073_QSG_V2_EN.ai 1 1/13/2021 12:36:24 PM
Loading ...