Loading ...
Loading ...
Loading ...
4
ASSEMBLY INSTRUCTIONS
1. Align a hole of the Lower Ring (D) with a hole
in one of the Legs (E). Using a screwdriver,
loosely attach the Leg (E) to the Ring (D)
with a M6x6mm Bolt. Repeat this step for the
remaining three legs. Do not tighten at this time.
1
E
AA
D
2
2. Turn the leg assembly right side up.
Align the holes of the Upper Support Ring (C)
with the side holes on each Leg (E). Using a
screwdriver, attach each Leg (E) to the Upper
Support Ring with a M6x6mm bolt.
Once the base assembly is completed, securely
tighten all bolts with a screwdriver.
C
AA
E
3. Place the Fire Bowl (B) into the base assembly.
Then, place the Mesh Cover (A) onto the
Fire Bowl (B).
3
D
A
B
Hardware Used
AA
M6x6mm Bolt x4
Hardware Used
AA
M6x6mm Bolt x4
Loading ...
Loading ...