Loading ...
Loading ...
Loading ...
9
ASSEMBLY INSTRUCTIONS
Hardware Used
HH
II
JJ
10
11
10. Remove protective cover from reflector panel (A)
and reflector plate (B).
Note: In order to achieve proper alignment of
reflector sections, it may be necessary to loosen the
preassembled bolts prior to assembly and retighten
once complete.
11. Attach reflector panels (A) together using
M6 x 10 mm screws (II) and 6 medium washers (HH).
Secure loosely with cap nuts (JJ).
12. Attach reflector plate (B) to reflector panels (A)
using M6 x 10 mm screws (II) and 6 medium
washers (HH). Secure loosely with cap nuts (JJ).
Once properly aligned, tighten all screws and the
preassembled bolts.
x 3
x 3
x 3
Medium Washer
M6 X 10 mm Screw
B
JJ
HH
II
A
Cap Nut
Hardware Used
HH
II
JJ
x 6
x 6
x 6
Medium Washer
M6 X 10 mm Screw
Cap Nut
12
JJ
HH
II
Loading ...
Loading ...
Loading ...