Loading ...
Loading ...
Loading ...
2. CONTENTS
- 3 -
- 10 -
Depending on manufacture and model, some engine components do change. Please check with
Autodata or the manufacturer’s data before use.
1. TITLE PAGE
1.1 INTRODUCTION.......................................................................................................... 2
1.2 REVISION HISTORY .................................................................................................. 2
1.3 UNDERSTANDING THIS GUIDE................................................................................. 2
1.4 COPYRIGHT NOTICE .................................................................................................2
2. CONTENTS
2.1 CONTENTS ....................................................................................................................3
3. GUARANTEE
3.1 GUARANTEE ............................................................................................................... 4
4. GENERAL PRODUCT INFORMATION
4.1 GENERAL PRODUCT INFORMATION ....................................................................... 5
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR USE
Personal safety........................................................................................................... 6
6. CONTENTS
6.1 PARTS DRAWING AND LISTING ............................................................................... 7
7. APPLICATION
7.1 PRODUCT APPLICATION AND COMPATIBILITY LISTING ...................................... 8
8. PREPARATION
8.1 ADVISORIES BEFORE USE ...................................................................................... 9
9. PROCEDURE AND APPLICATION GUIDE
9.1 APPLICATION GUIDANCE........................................................................................10
10. EXPLANATION OF SYMBOLS
10.1 EXPLANATION OF SYMBOLS .................................................................................. 11
9. PROCEDURE AND APPLICATION GUIDE
Please note images are for guidance only and subject to change.
Warning:
• Always refer to OEM vehicle specific data
• Remove all spark plugs to aid turning of the engine
WARNING: do not start the engine while the K00885 is fitted.
Component A
Components A is used to assess the amount of chain stretch in the
camshaft timing chain. Remove the timing chain tensioner and washer
from the engine - FIG:1. Screw in component A complete with the spacer
ring as shown - Fig:2. Tight to 20Nm.
i
n
g
as s
h
own -
Fig
:
2
.
Tight
t
o
2
FIG:1
FIG:2
Turn the engine 4 complete turns by hand in the normal
direction of rotation while watching the sprung loaded centre
rod of the K00885. The centre rod will move in and out as
the engine is turned.
If the rod falls below the level of the head of the K00885 outer body the
chain has excessive stretch and should be replaced along with associated
guides and tensioners. Always check OEM instructions to confirm result.
WARNING: Never start or attempt to run the engine with the
K00885 installed or without the chain tensioner installed.
Loading ...
Loading ...