Loading ...
Loading ...
Loading ...
5
20” Widescreen LED Monitor
www.insigniaproducts.com
Windows XP:
1 Right-click on your desktop, then click
Properties.
2 Click the Display dropdown menu and select 2.
(Default Monitor), then click the Extend my
Windows desktop onto this monitor check
box.
3 Drag the monitor icons to match the way you
have your monitors setup on your desk.
4 Click OK.
5 Click Ye s to use the extended display, or click No
to go back to the previous setting.
Mac:
1 Open the Apple menu, then select System
Preferences.
2 Click Displays under Hardware, then click
Arrangement.
3 Drag the monitor icons to match the way you
have your monitors setup on your desk.
4 Close the Displays window.
How do I duplicate my screen to a second
monitor?
Windows 7:
1 Right-click on your desktop, then click Screen
resolution.
2 Click the Multiple displays dropdown and
select Duplicate these displays.
3 Click OK.
4 Click Keep to use the extended display, or click
Revert to go back to the previous setting.
Windows Vista:
1 Right-click on your desktop, then click
Personalize.
2 Click Connect to a projector or other external
display. The Windows Mobility Center opens.
3 Click Connect display. The new display is
detected.
4 Select Duplicate my desktop on all display
(mirrored), then click OK.
5 Close the Windows Mobility Center window and
the Control Panel.
Windows XP:
1 Right-click on the desktop, then click the control
panel for your video card (if available).
2 Set the display mode on the video card control
panel.
Mac:
1 Open the Apple menu, then select System
Preferences.
2 Click Displays under Hardware, then click
Arrangement.
3 Check the Mirror Displays box.
4 Close the Displays window.
My power cord or VGA cable is damaged or
missing. Can I get a replacement?
Yes, power cords or VGA cables are available.
Contact Insignia Customer Support at
1-877-467-4289 or www.insigniaproducts.com
Specifications
Note: Product specifications are subject to change without notice.
Note
To be sure which monitor is 1 or 2 click the Identify
button.
Symptom Possible Solutions
No power
• Make sure A/C power cord is securely connected to the
power adapter and the power supply is firmly connected
to the monitor.
• Plug another electrical device into the power outlet to
verify that the outlet is supplying proper voltage.
• Make sure a VGA or DVI cable is installed.
• Check to see if the blue power LED is ON.
• Make sure that the computer is turned ON.
Power on but no
screen image
• Make sure the VGA cable supplied with the monitor, or
DVI cable (not included) is tightly secured to the VGA or
DVI output port on back of the computer. If not, tightly
secure it.
• Adjust the brightness. See “Using the on screen display
(OSD)” on page 3.
Wrong or abnormal
colors
• If any colors (red, green, blue) are missing, check the
VGA or DVI cable to make sure it is securely connected.
Loose or broken pins in the cable connector could cause
an improper connection.
• Connect the monitor to another computer.
• Make sure that the VGA or DVI cable you are using is not
damaged or broken.
• Try adjusting the colors on your monitor, see Color Adjust
under Using the On Screen Display (OSD). (Make sure to
cross-reference or hyperlink the text to this section in
the manual). See “Using the on screen display (OSD)” on
page 3.
LCD Panel 20” (50.8 cm) TFT
Power Management Energy Star Compliant VESA
DPMS compatible
<1 W
Display Resolution WXGA+ 1600 x 900 max. Vertical Frequency 60Hz max.
Pixel Dimensions 0.2768 x 0.2768 mm
LCD Display Color 16.7 M
Tilt -5° ~ 20°
Active Display Area 17.43 x 9.81 inches (442.8 x 249.07 mm)
Te mpera tu re Operating: 32° F ~ 104° F (0° C ~ +40° C)
Storage: -4° F ~ 140° F (-20° C ~ +60° C)
Compliance cULus, FCC-B, Energy Star
Power Input voltage AC 100-240 V
NS-20EM50A13_12-0349_MAN_V1_EN.book Page 5 Wednesday, July 18, 2012 11:38 AM
Loading ...
Loading ...
Loading ...