RN361050 MUK Rev1
* Register at www.morphyrichards.co.uk/support
UK and Ireland customers only
Please read and keep these instructions for future use
If you experience any problems with this Garment Steamer, do not return to the store.
Please contact our help line who will be happy to help:
We do stock spare brush attachments, so if you need a replacement please call
0344 873 0710.
UK: 0344 871 0944 IRE: 1800 409 119
Register your guarantee online: www.morphyrichards.co.uk/support
We'll keep you updated with special offers, competitions and important product information.
IMPORTANT: To reduce limescale damage, we recommend the use of distilled,
deionised or demineralised water. This is particularly important if you live in a hard
water area.
Never use battery topping up fluid or water containing any substances like starch,
sugar, fragrant additives or defrosted water from a refrigerator.
Failure to maintain your product will invalidate your guarantee.
RN361050 MUK Rev1.qxp_IB 08/04/2019 14:22 Page 1
2
Important safety instructions
•
WARNING: Care should be taken when using the
appliance due to emission of steam.
•
WARNING: Misuse of the appliance could cause personal injury.
•
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience or knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
•
Children shall not play with the appliance.
•
Cleaning and user maintenance shall not be made by children
without supervision.
•
Keep the Garment Steamer and its cord out of reach of children less
than 8 years of age at all times.
•
If the supply cable is damaged, it must be replaced by the
manufacturer or its service agent in order to avoid a hazard.
•
The Garment Steamer must not be left unattended while it is
connected to the supply mains.
•
The plug must be removed from the socket before filling the Garment
Steamer with water.
•
When placing the Garment Steamer on its base, ensure that the
surface on which the base is placed is stable.
•
The Garment Steamer is not to be used if it has been dropped, if
there are visible signs of damage or it is leaking.
•
CAUTION - HOT: Burns can occur from
touching hot parts, hot water or steam.
• WARNING: To avoid electric shock, do not
immerse appliance in water / liquid.
• WARNING: Care must be taken when emptying
a steam appliance as there may be hot water in
the reservoir.
Electrical requirements and mains cable
• Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating current).
• Do not operate with a damaged supply cord or
grommet, it must be replaced by the manufacturer,
its service agent or similarly qualified person in order
to avoid a hazard.
• Do not let the mains lead come into contact with the
hot hotplate of the Garment Steamer.
• Should the fuse in the mains plug require changing,
a 13 amp BS1362 fuse must be fitted.
• WARNING: This appliance must be earthed.
PLEASE READ ALL INSTRUCTIONS AND KEEP
FOR REFERENCE
RN361050 MUK Rev1.qxp_IB 08/04/2019 14:22 Page 2
3
(1) Brush attachment
(2) Hotplate
(3) Brush attachment
removal tab
(4) Handheld steamer
(5) Hanger hook
(6) Handheld steamer rest
(7) Hanger
(8) Trouser clips
(9) Telescopic poles
(10) Pole locking clips
(11) Steam supply cord
(12) Filling hole valve
(13) Water tank filling hole
(14) Removable water tank
(15) Power indicator light
(16) Water tank handle
(17) Steam dial
(18) Base
(19) Power cord
(20) Removable descale plug
(21) Power cord clip
Express Steam Pro
1
3
5
7
8
9
10
2
6
11
4
14
2019
18
15
1716
13
12
14
21
RN361050 MUK Rev1.qxp_IB 08/04/2019 14:22 Page 3
4
Pull the telescopic poles (9) upwards to extend. With the telescopic poles (9) extended, use the
pole locking clips (10) to lock the poles into
position at your desired height.
1) Extending the telescopic poles 2) Locking the telescopic poles
Setting Up
Remove all packaging and any protective cover from the hotplate (2), if any. Unwind and straighten the
power cord
(19).
Be
f
o
re
f
i
r
st
use
Insert the lower end of the telescopic poles (9)
into the hole in the top of the base (18). Align the
groove on the tube with the unlock icon next to
the hole. Rotate the telescopic poles clockwise
to lock into position, so the groove aligns with
the lock icon.
Position the hanger (7) onto the top of the
telescopic poles (9).
NOTE: The handheld steamer rest
(6) should
be at the front of the product.
3) Attaching the telescopic poles 4) Attaching the hanger
Position the handheld steamer (4) in the
handheld steamer rest (6), ready for use.
5) Handheld steamer rest
RN361050 MUK Rev1.qxp_IB 08/04/2019 14:22 Page 4
5
Using the Express Steam Pro
NOTE: To prevent limescale, we recommend
distilled, de-ionised or demineralised water
(available from most large supermarkets). Never
use battery topping up fluid or water containing
any substances like starch, sugar, fragrant
additives or defrosted water from a refrigerator.
Please see point 2 of ‘Exclusions’ on page 8.
To use, h
old the water tank handle (16) and lift the
removable water tank
(14) from the base
(18)
. Turn
the tank upside down to reveal the filling hole valve
(12). Unscrew the valve and remove. Fill the tank as
required - a full tank will provide over 60 minutes of
steaming. Replace the valve, screwing it firmly into
place. Turn the tank upright again and relocate
onto the base, ensuring it is fitted correctly.
After use, remove the tank and empty the water. Do
not move the whole product with water in the tank,
as a small amount of water may be released.
NOTE: When the tank is fitted, the valve will
automatically open to release water into the base.
When removing the tank, it is normal for water to
drip and for water to remain in the well in the base
under the tank. Please allow the product to cool
before removing this water.
WARNING: Always ensure the descale plug
(20)
is fully tightened, or it may leak water/steam.
Hang the garment to be steamed over the
hanger
(7) at the top of the telescopic poles (9).
Alternatively, use a non-metal coat hanger which
can be hung from the hanger hook
(5).
If steaming trousers, they may be hung by
attaching them to the trouser clips
(8) under the
hanger.
1) Filling the tank 2) Hanging the garment
The brush attachment (1) removes hair and loose
fibres from the garment before steaming. Check
the garment is suitable for brushing and steaming.
Click the attachment into place on the hotplate
(2).
WARNING: Only fit or remove the brush
attachment whilst the handheld steamer
(4) is
cool, and never whilst emitting steam.
Remove the brush attachment
(1) by pulling the
removal tab
(3).
Plug in and switch on at the mains. Turn the steam
dial
(17) to the desired setting. The power indicator
light
(15) will illuminate. The unit will reach optimal
temperature and automatically begin emitting steam
from the hotplate
(2) in approximately 45 seconds.
Steaming will continue until it is switched off at the
mains or until the water tank
(14) is empty
.
WARNING: There may be residual steam emitted,
even after switching off the unit.
3) Brush accessory 4) Switching on
RN361050 MUK Rev1.qxp_IB 08/04/2019 14:22 Page 5
6
Using the Express Steam Pro (continued)
Hold the hotplate (2) around 1 inch from the
surface of the garment. Pass the Garment
Steamer over the garment whilst steaming, you
may need to do this a few times to remove more
stubborn creases.
Occasionally brush the garment with the brush
accessory to help relax the fibres.
WARNING: Do not direct steam at animals or
people. Do not steam clothes that are being worn.
F
or extra steam to tackle stubborn creases /
heavy fabrics, increase the steam output by
turning the steam dial
(17)
to the higher settings.
There are three steam settings: low; medium;
high.
5) Steaming 6) Steam level selection
Once finished, t
urn the steam dial
(17)
to ‘O’
and
unplug from the mains to switch off.
8) Switching off
The handheld steamer (4) can be stored in
the handheld steamer rest
(6) in-between
selecting garments and to cool when the
unit is switched off.
7) Handheld steamer rest
Emptying and s
toring
When you have finished steaming, unplug from
the mains outlet.
Allow the unit to completely
cool, then
empty all water from the
removable
water tank
(14). Hold the water tank handle (16)
and lift the removable water tank up from the base
(18)
. Turn the removable water tank upside down to
reveal the filling hole valve
(12). Unscrew the filling
hole valve and remove. Empty the water tank via
the filling hole
(13). Then, replace the filling hole
valve, screwing it firmly into place. Turn the water
tank upright again and firmly press back into
position.
NOTE: It is normal for residue water to collect in the
reservoir in the base
(18). The water can be removed
by opening the descale plug
(20) (see page 7).
Maintenance
RN361050 MUK Rev1.qxp_IB 08/04/2019 14:22 Page 6
7
W
hen cool, wrap the power cord
(
19)
l
oosely
a
round the base
(
18)
a
nd secure in place using
the power cord clip
(21)
.
N
OTE: Please see point 4 of ‘Exclusions’ on
page 8.
Unclip the pole locking clips
(10)
to compress
the telescopic poles
(9)
. To remove the poles
from the hole in the top of the base, rotate them
anti-clockwise and pull upwards.
Care and cleaning
To clean a stainless steel hotplate
We recommend using a generally available
gentle chrome, silver or stainless steel cleaner.
Always follow the manufacturer’s instructions.
If any man-made fibres fuse to the hotplate
(2),
pass it over a clean piece of cotton to draw the
deposit off the surface.
To clean the exterior
Allow the unit to cool and wipe over with a damp
cloth and mild detergent, then wipe dry.
Removing limescale
1
Ensure the Express Steam Pro is unplugged
f
rom the mains. Allow to cool for two hours.
2
Position the Express Steam Pro next to a sink with
t
he removable descale plug
(
20)
o
ver the sink.
3
Half fill the removable water tank
(14)
and
replace it back onto the base
(18)
.
4 R
emove the descale plug and allow the water to
empty out into the sink, taking with it
loose
mineral deposits
.
5
Once the boiler is empty, replace the
descale
plug. Please make sure it is fully tightened back
to the padlock position, otherwise it may leak
water and steam
.
Maintenance (continued)
IMPORTANT:
Do not switch on the product unless the
removable water tank
(14)
is fitted.
Always switch the product off befo
re removing the water tank
.
IMPORTANT:
During use, take care never to kink or squash the steam supply cord
(11)
.
RN361050 MUK Rev1.qxp_IB 08/04/2019 14:22 Page 7
RN361050 MUK Rev1 04/19
Your standard 1 year guarantee is extended for an
additional 1 year when you register the product within 28
days of purchase with Morphy Richards. If you do not
r
egister the product with Morphy Richards within 28 days,
y
our product is guaranteed for 1 year. To validate your 2
year guarantee, register with us online at
www.morphyrichards.co.uk/support
Or call our customer registration line
UK 0344 871 0242
I
RE 1800 409 119
N.B. Each qualifying product needs to be registered with
M
orphy Richards individually.
Please note that the 2 year guarantee is only available in
the UK and Ireland. Please refer to the 1 year guarantee
for more information.
It is important to retain the retailer’s receipt as proof of
purchase. Staple your receipt to this back cover for future
reference.
Please quote the following information if the product
develops a fault. These numbers can be found on the base
of the product.
Model no. Serial no.
All Morphy Richards products are individually tested before
leaving the factory. In the unlikely event of any appliance
proving to be faulty within 28 days of purchase, it should
be returned to the place of purchase for it to be replaced.
If the fault develops after 28 days and within 12 months of
original purchase, you should contact the Helpline number
quoting Model number and Serial number on the product,
or write to Morphy Richards at the address shown.
You may be asked to return a copy of proof of purchase.
Subject to the exclusions (see Exclusions), the faulty
appliance will then be repaired or replaced as appropriate
and dispatched usually within 7 working days of receipt.
If, for any reason, this item is replaced or repaired during
the 1 year guarantee period, the guarantee on the new
item will be calculated from original purchase date.
Therefore it is vital to retain your original till receipt or
invoice to indicate the date of initial purchase.
To qualify for the 1 year guarantee, the appliance must
have been used according to the instructions supplied.
Morphy Richards shall not be liable to replace or repair the
goods under the terms of the guarantee where:
1 The fault has been caused or is attributable to accidental
use, misuse, negligent use or used contrary to the
m
anufacturer’s recommendations or where the fault has
b
een caused by power surges or damage caused in transit.
2 The fault has been caused by using water other than that
recommended by Morphy Richards.
3 T
he fault is caused by limescale build-up.
4 T
he cables are damaged due to wrapping too tightly or
excessive kinking.
5 T
he appliance has been used on a voltage supply other
than that stamped on the products.
6 Repairs have been attempted by persons other than our
service staff (or authorised dealer).
7 The appliance has been used for hire purposes or non
d
omestic use.
8 The appliance is second hand.
9 Morphy Richards reserves the right not to carry out any
type of servicing under the guarantee at its discretion.
• This guarantee does not confer any rights other than those
expressly set out above and does not cover any claims for
consequential loss or damage. This guarantee is offered
as an additional benefit and does not affect your statutory
rights as a consumer. Morphy Richards products are
intended for household use only. See usage limitations
within the location safety instructions.
Morphy Richards has a policy of continuous improvement
in product quality and design. The company, therefore
reserves the right to change the specification of
its models at any time.
For electrical products sold within the
European Community. At the end of the
electrical products useful life, it should not be
disposed of with household waste.
Please recycle where facilities exist. Check
with your Local Authority or retailer for
recycling advice in your country.
Exclusions
Your 1 year guarantee
Disclaimer
Registering your guarantee
Helpline
If you are having a problem with your appliance,
please call our Helpline, as we are more likely to
be able to help than the store you purchased the
item from. Please have the product name, model
number and serial number to hand when you call
to help us deal with your enquiry quicker.
UK Helpline: 0344 871 0944
IRE Helpline: 1800 409 119
Spares: 0344 873 0710
Talk to us
If you have any questions or comments, or want
some great tips to help you get the most out of
your products, join us online:
Blog: www.morphyrichards.co.uk/blog
Facebook: www.facebook.com/morphyrichardsuk
Twitter: @loveyourmorphy
Website: www.morphyrichards.com
Address:
The After Sales Division
Morphy Richards Ltd
Mexborough,
South Yorkshire,
England, S64 8AJ
Contact us
RN361050 MUK Rev1.qxp_IB 08/04/2019 14:22 Page 8
