Loading ...
Loading ...
Loading ...
Indoor Unit
Installation
Step 4: Adjust the air inlet direction
(from rear side to under-side).
1. Take o the ventilation panel and ange.
2. Change the mounting positions of the
ventilation panel and air return ange.
Air Return Flange
Ventilation Panel
3. When installing the lter mesh, t it into the
ange, as illustrated in the following gure.
NOTE: All gures in this manual are for
explanatory purposes only. The air conditioner
you have purchased may slightly dier in
design, though it remains similar in shape.
Step 5: Fresh air duct installation
Dimension :
Duct Joint for fresh air
Ø125mm(5”)
Ø160mm (6-1/4”)
MODEL
18-60
Step 6: Motor and drain pump maintenance
Motor Maintenance:
Take o the ventilated panel.
Take o the blower housing.
Take o the motor.
1.
2.
3.
(The rear ventilated panel is used as an example)
Motor
Blower Housing
Ventilated Panel
Pump Maintenance:
Remove four screws from the drain pump.
Unplug the pump power supply and water
level switch cable.
Detach the pump.
1.
2.
3.
Pump
Fig. 4.11
Fig. 4.12
Fig. 4.13
Fig. 4.14
Fig. 4.15
Fig. 4.16
Air Return Flange
Ventilation panel
Page 12
Loading ...
Loading ...
Loading ...