Loading ...
Loading ...
Loading ...
11
OPERATING INSTRUCTIONS
1. Turn the heater on or off by pressing the Power
button on the control panel (C) or by pressing
the Power button on the remote control (B).
Once the power is off, heating elements will
stop working first. The fan will continue working
for up to 90 seconds to dispense residual heat
inside the heater. This is a normal function.
1
C
B
2. Select a heat setting by pressing the MODE
button on either the control panel (C) or the
remote control (B) to toggle between the three
heat settings and fan only mode.
Power for heat-up mode is 1,500 W; heat-down
is 750 W. ECO mode is an Economic Energy
Saving Function. When ECO mode is chosen,
the heater will operate to maintain a constant
warm 68°F
Note: The ECO LED light will only illuminate
when the ECO function is active and the
ambient room temperature falls below
68ºF / 20ºC.
2
C
B
HIGH LOWECO
UV
3. Set the temperature by pressing the arrows on
the control panel (C) or the remote control (B).
You can set the temperature on the heater
anywhere between 50°F and 90°F or between
10°C and 32°C. Once you have chosen the
desired temperature, the heater will remain
on until the room temperature increases to the
temperature on the digital display. The heater
will cycle on and off to maintain the desired
room temperature.
To view the ambient temperature press the
ambient temperature button on the control
panel.
Note: Press and hold the ambient temperature
button on the control panel (C) for 5 seconds
to switch the digital display indicator on the
heater between Fahrenheit and Celsius.
On the remote, short press the ambient
temperature button to engage Ambient
Temperature.
3
C
B
C
OR
Loading ...
Loading ...
Loading ...