Loading ...
Loading ...
Loading ...
13
48-Can Beverage Cooler
www.insigniaproducts.com
Troubleshooting
Fault indication
If a fault is detected, the display shows one of the following codes:
CAUTION: Do not try to repair your beverage cooler yourself. Doing so
invalidates the warranty.
Fault code E1 E2
Description Temperature sensor fault Defroster sensor fault
Note: When the above faults are displayed, do not attempt to repair your
cooler by yourself. Please contact customer service for help.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
My beverage
cooler does not
operate
Your beverage cooler is
unplugged.
Make sure that your beverage cooler is plugged
in and that the plug is pushed completely into
the outlet.
The fuse on the circuit
is blown or the circuit
breaker is tripped.
Check the house fuse/circuit breaker box and
replace the fuse or reset the circuit breaker.
Power failure. If a power failure occurs, your beverage cooler
turns off. Wait until the power is restored, then
turn it on again.
The cooler door
does not close
completely
The shelf is out of
position.
Adjust the shelf correctly.
The door gaskets are
dirty.
Clean the door gaskets.
Your cooler is not level. Level your cooler with the leveling feet.
My cooler is not
cold enough
The door has been
opened too often or
was not closed
correctly.
Make sure that the door is closed correctly.
You have just added a
large amount of warm
beverage to your
cooler.
Allow time for the new beverage to cool, then
check again.
The temperature
control is set too warm.
Set the control to a colder setting.
Loading ...
Loading ...
Loading ...