Loading ...
Loading ...
Loading ...
12
www.insigniaproducts.com
Maintaining your beverage cooler
Your beverage cooler is designed for year-round use with only minimal cleaning and
maintenance.
When you first receive it, wipe the case with a mild detergent and warm water, then wipe
dry with a dry cloth. Do this periodically to keep your beverage cooler looking new.
1 Turn off your beverage cooler and unplug it from the wall outlet.
2 Remove all beverages.
3 Wash the inside with a damp warm cloth soaked in a solution of one quart of
lukewarm water to two tablespoons of baking soda solution.
4 Be sure to keep the door gasket (seal) clean to keep your cooler running efficiently.
5 Dry the interior and exterior with a soft cloth.
Storing your beverage cooler
1 Turn off your beverage cooler and unplug it from the wall outlet.
2 Remove all beverages.
3 Clean your beverage cooler.
4 Leave the door open slightly to avoid possible formation of condensation, mold, or
odor.
Moving your beverage cooler
1 Turn off your beverage cooler and unplug it from the wall outlet.
2 Remove all beverages.
3 Securely tape down all loose items inside your beverage cooler.
4 Tape the door shut.
Be sure your beverage cooler stays in the upright position during transportation.
Tips on saving energy
• Place your cooler in the coolest area of the room, away from heat producing
appliances or heating ducts and out of the direct sunlight.
• Do not overload your cooler because it forces the compressor to run longer.
• Do not open the door too often, especially if the weather is very hot. Close the door
as soon as possible to prevent cool air from escaping.
• Make sure that your cooler is sufficiently ventilated with adequate air circulation.
CAUTION:
To prevent damage to the finish, do not use:
• Gasoline, benzine, thinner, or other similar solvents.
• Abrasive cleaners.
CAUTION: Use extreme caution with children. Your cooler should not be
accessible to child's play.
Loading ...
Loading ...
Loading ...