Loading ...
Loading ...
Loading ...
5 Product
information
Note
• Product information is subject to change
without prior notice.
General information
USB port 5V 2A
Built-in Lithium battery 3.7V, 4400mAh
Dimensions (W x H x D)
170 x 70 x 72 mm
Operation Ambient
IP protection class
0 ℃~45 ℃
IP67*
Weight (main unit) 492 g
Amplier
Output power (RMS) 10 W
Frequency response 80 Hz - 20KHz
Signal to noise ratio > 75dB
Speaker
Impedance 4 Ω
Maximum input power 10W
Driver
Bluetooth
Bluetooth version 5.2
Frequency range 2402 - 2480 MHz
Maximum
transmition power
< 10dBm
Compatible
Bluetooth proles
HFP V1.7
Bluetooth range up to 20 m
44 x 80 mm
EN 7
IP protection class
6
Troubleshooting
Warning
• Never remove the casing of the speaker.
To keep the warranty valid, never try to
repair the speaker yourself.
If you encounter problems when using
this speaker, check the following points
before requesting service. If the problem
remains unsolved, go to the Philips
website (www.philips.com/support).
When you contact philips, ensure that
the speaker is nearby and the model
number and serial number are available.
General
No power
• Make sure the speaker is fully
charged.
• Make sure the USB socket of the
speaker is properly connected.
• As a power-saving feature, the
speaker turns o automatically
15 minutes after no audio signal
is received.
No sound
• Adjust the volume on this speaker.
• Adjust the volume on the connected
device.
•
Make sure that your Bluetooth
device is within the operational
range.
No response from the speaker
• Restart the speaker.
*The IP67 rating means the speaker driver is
dust tight and can be submerged for up to
30 minutes at a depth of up to 1 m.
Passive radiators 2
Loading ...
Loading ...
Loading ...