Loading ...
Loading ...
Loading ...
Page 6
Put the work top and hutch onto the cabinet.
Make sure the hutch is flush with the back
of the worktop. Leave equal gaps on either
side.
Connect the hutch, work top and cabinet
together using six of M8 x 40 hex bolts,
washers (#324000) and M8 hex flange nuts.
INSTALL SHELF AND
POWER STRIP
Install the shelf in the hutch using four
M8 x 20 hex bolts and washers (#324002).
Hang the power strip on the pegboard.
Replace the top drawer of the cabinet.
Extend the drawer slides from the tool
cabinet. Insert the brackets on each side of
the drawer into the slots in the slides, being
careful that they are positioned properly.
Once properly inserted, completely close
the drawer to set the slides in their proper
positions.
ASSEMBLY AND OPERATION
Loading ...
Loading ...
Loading ...