Loading ...
Loading ...
Loading ...
5
SERVICE CORD
The CAC is equipped with a 10-foot long service cord with a LCDI (Leakage Current
Detection & Interruption) device that serve as a means of electrical protection.
DO NOT USE THE LCDI AS AN ON/OFF SWITCH FOR THE UNIT
A DAMAGED LCDI POWER SUPPLY CORD MUST BE
REPLACED WITH A NEW POWER SUPPLY CORD AND
NOT REPAIRED
MODEL PLUG CONFIGURATION RECEPTACLE
CAC
NEMA-5-15R
15A-125 VOLT
NEMA 5-15P
USE OF EXTENSION CORDS
CAUTION: AN EXTENSION CORD CAN BE USED PROVIDED IT IS RATED AT
LEAST 15 AMPS @ 115 VOLTS WITH GROUNDING-TYPE ATTACHMENT PLUG AND
GROUNDING TYPE CONNECTOR (LOAD FITTING).
ELECTRICAL CONFIGURATION
PORTABLE CONFIGURATION
The CAC is equipped with a 10-foot power cord for ease of movement and portability.
The cord is to be plugged into a 15 Amp receptacle. A dedicated circuit is required.
PERMANENT INSTALLATION
The CAC can be installed in a permanent configuration, as the control box is suitable for
field wiring. The unit can be hung from 5/16” threaded rods, or be installed with the use
of UniStrut. Instructions for Permanent installations are on Pages 8 and 9 in the manual.
When hanging and permanently connecting the CAC, all applicable
local/state/federal building codes must be followed.
The structural beam(s) must be capable of properly supporting the weight
of the unit (135 lbs.)
Loading ...
Loading ...
Loading ...