Loading ...
Loading ...
Loading ...
16
EVAPORATOR RETURN AIR
PLENUM, CEP-6
An evaporator return air plenum is available for installations
where it is required to duct air to the inlet of the evaporator.
The return air plenum allows the user to connect round duct
(flexible or rigid) to the return air intake and reduce air noise,
while increasing the number of options for solving difficult
cooling problems. The plenum attaches to the front of the
unit, replacing the return air grille.
The CEP-6 transitions the return air opening to
(2) 6-inch round collars. The CEP-6 has space provided
for a 16 X 8 filter.
NOTE—When an evaporator return air plenum is installed, it is recommended to
set the evaporator blower speed to high, to avoid evaporator coil freeze-up.
ACCESSORIES
CONDENSER RETURN AIR
PLENUM, CCP-8
A condenser return air plenum is available for installations
where it is required to duct air to the inlet of the condenser.
The plenum easily attaches to the unit, and provides a
collar for connecting 8-inch flexible ducting. The CCP-8 has
space for a 12” x 20” filter.
NOTE — When installing the condenser return air
plenum with additional duct/hardware, allow for a mini-
mum separation distance at 2-feet between the dis-
charge duct and return duct. It is also recommended to
direct the condenser discharge air away from the con-
denser return air duct.
REMOTE THERMOSTAT KIT,
RTK-1
The RTK-1 is a field installed kit that allows
for the display of the CAC to be installed
remotely, allowing the unit to be controlled
from within the conditioned space. The kit
includes a cover plate for the unit and a
display installation panel.
NOTICE - The RTK-1 requires a display
cable
(sold separately):
012-006, 6 ft. Display Cable
012-008, 75 ft. Display Cable
012-009, 25 ft. Display Cable
Loading ...
Loading ...
Loading ...