Loading ...
Loading ...
Loading ...
5
3. The following table indicates the approximate relative humidity settings
against its related position number on the humidity control switch:
CONTROL SWITCH POSITION
NO.
APPROXIMATE HUMIDITY
SETTING
Cont.
Continuous running
8
20
﹪
7
30
﹪
6
40
﹪
4
60
﹪
2
80
﹪
4. The ideal position is around position 6- approximately 40% relative
humidity
5. The operational temperature range for this unit is 5-35°C. Please note the
effectiveness of the product reduces as the ambient temperature reduces.
For example in a room of 6
o
C- little if any moisture will be removed. The
product works on the principal that it requires a high ambient temperature
with warm air drawing over a very cold compressor creating water
droplets.
6. Other than on the case of note 2 above, where the dehumidifier does not
start, the operational light does not illuminate or the dehumidifier
intermittently stops for unknown reasons, please check the plug and
power supply for poor connection. If the plug and power supply are in
good condition, wait for 10 minutes and restart the unit (it can take about
10 minutes for the unit to reset). If the unit still does not start after 10
minutes, please contact your retailer or the manufacturer for repair.
7. When the dehumidifier is in operation, the running compressor will
produce heat. This is normal and may potentially raise the room
temperature.
8. When the product is defrosting, the defrost LED will illuminate. The
reason this happens is because the compressor gets very cold to
maximize moisture removal. The defrost function protects the compressor
from freezing up and avoid damage to the product.
Loading ...
Loading ...
Loading ...