Klarstein 10035824 User Manual

Loading ...

In case there was no power failure and it is not the rst time you start the unit, the last

operating state before switching off is maintained (except the timer, sleep mode and

lter drying functions). After the rst power on, the initial functional state of the device is

as follows:

• The low speed indicator lamp lights up.

• The default setting is normal wind.

• The humidication/air cooling function is off.

• The timer is off.

• The oscillation function is off.

When the appliance is on, press the on/off button to switch off all functions and enter

standby mode.

Speed

When the device is on, press the speed button several times to adjust the speed as

follows: low > medium > high > low. If you change the speed, the fan will stop briey

before moving to the next set speed level.

Filter drying function

When the device is in the on state, press and hold the speed button for 3 seconds. The

high speed light ashes continuously. The lter drying function starts and the fan runs at

high speed for 20 minutes. During the 20 minute high speed operation, only the On/Off

button can be used. The other buttons do not function during the lter drying.

Humidication/Cooling

When the unit is in the on state, press the humidication button to start the Cooling by

humidication function. The corresponding light comes on. Press the button again to

deactivate the function. If you do not deactivate the function manually, it will go off

automatically after 10 hours.

Setting the switch-off timer

When the device is in the on state, press the Timer button several times to select the

desired switch-off time: 1h > 2h > 4h > 8h. The corresponding light comes on. After the

time has elapsed, the device switches off automatically.

Loading ...

Klarstein 10035824 Cooler Rush Fan Air Cooler