Loading ...
Loading ...
Loading ...
29
EN
CLEANING AND CARE
• Check regularly that all screws are tightened.
• Dust the unit weekly with a soft, lint-free cloth.
• If water has dripped on the unit, remove it immediately with a soft, clean cloth and
allow the unit to dry.
• Do not use abrasive or silicone-based cleaning agents.
• Do not store the device where it is exposed to direct sunlight or near heat sources.
• Do not use cleaning agents containing abrasive particles, as these can scratch the
surface.
• Do not place very hot or very cold objects in the immediate vicinity of the replace
surface - unless sufciently thick insulating material is used to prevent these objects
from coming into contact with the replace surface.
• Do not hit the control panel with hard or pointed objects.
• Do not rub heavily on the surface during cleaning.
Note on overheating protection
This unit has a safety shutdown that is activated when the air inlets or outlets are blocked
and the unit overheats. The unit continues to operate automatically when the temperature
drops.
Loading ...
Loading ...
Loading ...