Loading ...
quick start guide
Requirements
Minimum System Requirements
The latest Windows 7 and later, macOS 10.10 and later, iOS 9
and later, or Android 4.2 or later with Miracast; refer to online
support for the latest list.
Network Requirements
Refer to the online support for the most recent information.
Note: Additional network configuration is not required for
Wi-Fi Miracast enabled device to connect. Verify Group
Policy and firewall settings to allow Wi-Fi Direct groups or
hosted networks.
Setup Requirements
z ScreenBeam 960 receiver
z Display with an available HDMI input
z An ethernet network connection with DHCP IP or a
Wi-Fi router
2 | screenbeam.com
A. Connect Receiver to Display
Figure 1 Connection guide
1.
Place the receiver next to the display.
2.
Connect one end of the provided HDMI cable to the
receiver’s HDMI port and the other end to an available HDMI
port on the display.
Note: For VGA connection details, refer to the
ScreenBeam 960 User Guide.
3.
Optional: If the display has USB HID touch capability, insert
the HID USB connector into the USB port of the receiver.
(USB Cable is not included)
4.
Connect the receiver’s power supply to the receiver’s power
port, then to an electrical outlet.
5.
Optional: Connect one end of the Ethernet cable to the
receiver’s Ethernet port and connect the other end to
the network switch with DHCP IP. (Ethernet cable is not
included).
Note: Refer to section B for more information on setting
up a network connection.
6.
Turn on the display and switch to the corresponding input
connected to the receiver.
7.
Wait about 30 seconds, then verify the Ready to Connect
screen appears on the display.
Loading ...
Loading ...
Loading ...