Loading ...
Loading ...
Loading ...
Page 5
ASSEMBLY INSTRUCTIONS
In order to prevent removal of the post from the base use a hammer and flat end punch to hammer
the jack's tab in toward to post but not touching the post. Same stands are equipped with a bolt
instead of the tab. In this case the bolt can be threaded in toward the post until the bolt bottoms
out.
1. Install ratchet bar into frame (FIG.1) with
ratchet portion of bar aligned with locking pawl
(stopper).
2. Move the ratchet bar to its lowest position
by raising the locking handle, thereby releasing
the stopper, and guiding the bar downward
(FIG. 2).
FIG. 1 FIG. 2
3. Bend metal tab in (FIG. 3) using a hammer
and punch. This will help prevent inadvertent
separation of the ratchet bar from base frame.
4. Insert double locking pin (FIG. 4).
FIG. 3
FIG. 4
Metal tab
Double
locking pin
Loading ...
Loading ...
Loading ...