Loading ...
Loading ...
Loading ...
9
OPERATING INSTRUCTIONS
LEAK TEST
1. -to
2.
3.
4.
5.
IF BUBBLES APPEAR AT ANY CONNECTION, THERE IS A LEAK.
1. Turn cylinder valve OFF.
2.
appear, c
ontact customer service at [email protected].
3.
continue to see bubbles after several attempts, cylinder valve is defective. Contact customer service at
IF NO BUBBLES APPEAR AT ANY CONNECTION, THE CONNECTIONS ARE SECURE.
Note: Whenever gas connections are loosened or removed, you must perform a complete leak test.
Caution: Do not attempt to operate this appliance until you have read and
understand all Safety Information in this manual and all assembly is complete and
leak tests have been performed.
BEFORE TURNING GAS SUPPLY ON:
inside a building, garage, or any other enclosed area.
3. Ensure that there is no obstruction to air ventilation. Be sure all gas connections are
4. Be sure the cylinder cover is clear of debris. Be sure any component removed during assembly or servicing is replaced and
fastened prior to starting.
BEFORE LIGHTING:
hot heater, always wait at least 5 minutes.
WARNING
Do not use heater until all connections
WARNING
For Outdoor Use Only
WARNING
which has no color. Using it in an enclosed
enclosed space such as a camper, tent or home.
Contact us for assistance: [email protected]
Loading ...
Loading ...
Loading ...