Loading ...
Loading ...
Loading ...
7
Insignia NS-PDP32-09 32" PDP TV
www.insignia-products.com
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover on the back side of
the remote control.
2 Insert two 1.5 V AAA batteries into the
battery compartment. Make sure that you
match the + and – symbols on the batteries
with the + and – symbols in the battery
compartment.
3 Replace the cover.
Using the remote control
To use the remote control:
• Point the remote control directly at your TV,
within a 60° angle horizontally (30° to either
side) and within 30° vertically of the remote
control sensor on the front of your TV, and
within 16.4 feet (5 m) of your TV.
Setting up your TV
Connecting an antenna or cable TV
The antenna requirements for good color TV
reception are more important than those for
black and white reception. For this reason, a
good quality outdoor antenna or cable TV is
strongly recommended.
The following is a brief explanation of the type of
connection that is provided with the various
antenna systems.
12 INPUT Press to open the
Input Source
menu
showing the available input sources for
your TV. Press or to select the
source you want, then press ENTER to
confirm.
13 EXIT Press to exit the on-screen menus.
14
Press to navigate the on-screen menus.
15 ENTER Press to confirm your settings.
16 DISPLAY Press to display a variety of current
channel and input source information.
17 Red, green,
yellow, and
blue buttons
In TV mode, press to directly access four
presets from your Favorite List.
18 CH-LIST Press to display the channel list.
19 CLOCK Press to display the current time on the
screen.
20 HDMI Press repeatedly to cycle through the
available HDMI source inputs. Choices
include HDMI1, HDMI2, and HDMI3.
21 PICTURE Press to cycle through the available preset
picture modes. Choices include Vivid,
Normal, Cinema, Sport, and User.
22 ZOOM Press to cycle through the available aspect
ratios of the picture. Choices include
NORMAL, FULL, WIDE, and CINEMA.
23 In HDTV mode, press with 0~9 buttons to
select a digital sub-channel.
24
CH /
Press to change the channel.
25 FAVORITE Press to display your favorite channels list.
26 MENU Press to open the on-screen TV menus.
27 FREEZE Press to freeze the current picture. Press
again to resume normal viewing.
28 COLOR TEMP. Press to cycle through the available color
temperature presets. Choices include Cool,
Warm, and Normal.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
# Button Description
Caution
Do not expose the remote control to liquids, direct
sunlight, or shock. Do not mix batteries of different
types.
Notes
• Objects between the remote control and the
remote control sensor may block the remote
control signal.
• The range of the remote control may be
diminished if direct sunlight or other strong light
is shining on the remote control sensor. In this
case, change the angle of the lighting, move
your TV, or operate the remote control closer to
the remote control sensor.
08-1143 NS-PDP32-09 - ENG.fm Page 7 Friday, May 2, 2008 10:28 AM
Loading ...
Loading ...
Loading ...