Loading ...
Loading ...
Loading ...
Installat
ion and User Instructions R01127
-9 09/15
Page
36
Operation
10.2.2 Water temperature
auxiliary heating
The water temperature achieved by the
auxiliary heating system depends on
the setting of the thermostat on:
- the cylinder AND
- the auxiliary / solar heating source
The adjustment at the cylinder is
carried out on the twin thermostat
fitted to the cylinder as shown in Figure
16. In the event that the high
temperature cut-out engages, it will be
necessary to manually reset the
thermostat. Use a suitable electrically
insulated tool to push the manual reset
button and inform the installer.
Figure 16: Adjustment water temperature auxiliary source
10.3 Maintenance
The maintenance of this
appliance must be carried
out by a suitably qualified
person only. It is
recommended to maintain
the unit on an annual basis.
Isolate all electrical
supplies from the unit
before commencing work.
Danger of electrical shock!
See section 7.
Dial to adjust water
temperature
Manual re-set
Loading ...
Loading ...
Loading ...